FAG 7310B-JP Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Steel Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

FAG 7310B-JP Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Steel Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7310-B-JP
System of Measurement Metric
Bore Diameter 50  mm
Outside Diameter 110  mm
Overall Width 27  mm
Max Rotational Speed 7000  RPM
Static Load Capacity 11400  pounds
Dynamic Load Capacity 16000  pounds
EAN 4026677045188
Number of Items 1
UNSPSC Code 31171500
FAG 7228B-MP-UO Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 140mm ID, 250mm OD, 42mm Width, 4800rpm Maximum Rotational Speed, 47500lbf Static Load Capacity, 44000lbf Dynamic Load Capacity,

FAG 7228B-MP-UO Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 140mm ID, 250mm OD, 42mm Width, 4800rpm Maximum Rotational Speed, 47500lbf Static Load Capacity, 44000lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7228-B-MP-UO
System of Measurement Metric
Bore Diameter 140  mm
Outside Diameter 250  mm
Overall Width 42  mm
Max Rotational Speed 4800  RPM
Static Load Capacity 47500  pounds
Dynamic Load Capacity 44000  pounds
EAN 4012801283274
Number of Items 1
UNSPSC Code 31171500
FAG 7222B-MP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 110mm ID, 200mm OD, 38mm Width, 3600rpm Maximum Rotational Speed, 34500lbf Static Load Capacity, 34500lbf Dynamic Load Capacity,

FAG 7222B-MP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 110mm ID, 200mm OD, 38mm Width, 3600rpm Maximum Rotational Speed, 34500lbf Static Load Capacity, 34500lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7222-B-MP-UA
System of Measurement Metric
Bore Diameter 110  mm
Outside Diameter 200  mm
Overall Width 38  mm
Max Rotational Speed 3600  RPM
Static Load Capacity 34500  pounds
Dynamic Load Capacity 34500  pounds
EAN 4012801283106
Is Recalled? N
Item Weight 11.24 pounds
Number of Items 1
UNSPSC Code 31171500
FAG 7207B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 35mm ID, 72mm OD, 17mm Width, 11000rpm Maximum Rotational Speed, 4150lbf Static Load Capacity, 6100lbf Dynamic Load Capacity,

FAG 7207B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 35mm ID, 72mm OD, 17mm Width, 11000rpm Maximum Rotational Speed, 4150lbf Static Load Capacity, 6100lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7207-B-TVP-UA
System of Measurement Metric
Bore Diameter 35  mm
Outside Diameter 72  mm
Overall Width 17  mm
Max Rotational Speed 11000  RPM
Static Load Capacity 4150  pounds
Dynamic Load Capacity 6100  pounds
EAN 4012801165969
Number of Items 1
UNSPSC Code 31171500
FAG 7204B-TVP Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 20mm ID, 47mm OD, 14mm Width, 18000rpm Maximum Rotational Speed, 1760lbf Static Load Capacity, 2900lbf Dynamic Load Capacity,

FAG 7204B-TVP Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 20mm ID, 47mm OD, 14mm Width, 18000rpm Maximum Rotational Speed, 1760lbf Static Load Capacity, 2900lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7204-B-TVP
System of Measurement Metric
Bore Diameter 20  mm
Outside Diameter 47  mm
Overall Width 14  mm
Max Rotational Speed 18000  RPM
Static Load Capacity 1760  pounds
Dynamic Load Capacity 2900  pounds
EAN 4012801011808
Number of Items 1
UNSPSC Code 31171500
FAG 23024E1A-M-C4 Spherical Roller Bearing, Straight Bore, Brass Cage, C4 Clearance, Metric, 120mm ID, 180mm OD, 46mm Width

FAG 23024E1A-M-C4 Spherical Roller Bearing, Straight Bore, Brass Cage, C4 Clearance, Metric, 120mm ID, 180mm OD, 46mm Width

Bearing, Bearing FAG·

Specifications for this item
Brand Name FAG Bearings
Part Number 23024-E1A-M-C4
System of Measurement Metric
Bore Diameter 120 mm
Outside Diameter 180 mm
Overall Width 46 mm
EAN 4026677870957
Item Weight 8.84 pounds
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505

Product Features

E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
Solid brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
P5 precision on rings and hardened inner ring
C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor
Straight bore fits conventional cylindrical shafts

Product Description

This FAG E1 Series spherical roller bearing has a brass cage, a C4 radial clearance, an outer ring with lubrication groove and three oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the solid brass cage spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.
Specifications
Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

FAG 22214E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 70mm ID, 125mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 228kN Static Load Capacity, 212kN Dynamic Load Capacity

FAG 22214E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 70mm ID, 125mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 228kN Static Load Capacity, 212kN Dynamic Load Capacity

Bearing, Bearing FAG·

Specifications for this item
Brand Name FAG Bearings
Part Number 22214-E1A-K-M-C3
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 70 mm
Outside Diameter 125 mm
Overall Width 31 mm
Max Rotational Speed 6300 RPM
Static Load Capacity 228 Kilonewtons
Dynamic Load Capacity 212 Kilonewtons
EAN 4026677849243
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.
Specifications
Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

FAG 21316E1TVPB-C3 Spherical Roller Bearing, Straight Bore, Polyamide/Nylon Cage, C3 Clearance, Metric, 80mm ID, 170mm OD, 39mm Width

FAG 21316E1TVPB-C3 Spherical Roller Bearing, Straight Bore, Polyamide/Nylon Cage, C3 Clearance, Metric, 80mm ID, 170mm OD, 39mm Width

Bearing, Bearing FAG·

Specifications for this item
Brand Name FAG Bearings
Part Number 21316-E1-TVPB-C3
System of Measurement Metric
Bore Diameter 80 mm
Outside Diameter 170 mm
Overall Width 39 mm
EAN 4026677832054
Item Weight 9.32 pounds
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505

Product Features

E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
Polyamide and nylon cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
P5 precision on rings and hardened inner ring
C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
Straight bore fits conventional cylindrical shafts

Product Description

This FAG E1 Series spherical roller bearing has a polyamide and nylon cage, a C3 radial clearance, an outer ring with lubrication groove and three oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the polyamide and nylon cage is lightweight, spaces the oversize rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 248 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.
Specifications
Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

FAG 22308E1-C3 Spherical Roller Bearing, Straight Bore, Steel Cage, C3 Clearance, Metric, 40mm ID, 90mm OD, 33mm Width

FAG 22308E1-C3 Spherical Roller Bearing, Straight Bore, Steel Cage, C3 Clearance, Metric, 40mm ID, 90mm OD, 33mm Width

Bearing, Bearing FAG·

Specifications for this item
Brand Name FAG Bearings
Part Number 22308-E1-C3
System of Measurement Metric
Bore Diameter 40 mm
Outside Diameter 90 mm
Overall Width 33 mm
EAN 4026677806635
Item Weight 2.16 pounds
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505

Product Features

E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
Pressed steel cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
P5 precision on rings and hardened inner ring
C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
Straight bore fits conventional cylindrical shafts

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a C3 radial clearance, an outer ring with lubrication groove and 3 oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.
Specifications
Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

FAG 21304E1TVPB Spherical Roller Bearing, Straight Bore, Polyamide/Nylon Cage, Normal Clearance, Metric, 20mm ID, 52mm OD, 15mm Width

FAG 21304E1TVPB Spherical Roller Bearing, Straight Bore, Polyamide/Nylon Cage, Normal Clearance, Metric, 20mm ID, 52mm OD, 15mm Width

Bearing, Bearing FAG·

Specifications for this item
Brand Name FAG Bearings
Part Number 21304-E1-TVPB
System of Measurement Metric
Bore Diameter 20 mm
Outside Diameter 52 mm
Overall Width 15 mm
EAN 4026677808080
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505

Product Features

E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
Polyamide and nylon cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
P5 precision on rings and hardened inner ring
CN (normal) radial clearance for applications where thermal expansion is not a factor
Straight bore fits conventional cylindrical shafts

Product Description

This FAG E1 Series spherical roller bearing has a polyamide and nylon cage, a CN radial clearance, an outer ring with lubrication groove and three oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the polyamide and nylon cage is lightweight, spaces the oversize rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. Its CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 248 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.
Specifications
Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.