Bearing FAG

Specifications for this item
Brand Name FAG Bearings
Part Number 6015-2Z-C3
System of Measurement Metric
Bore Diameter 75 mm
Outside Diameter 115 mm
Overall Width 20 mm
Max Rotational Speed 6700 RPM
Static Load Capacity 8930 pounds
Dynamic Load Capacity 7530 pounds
EAN 4012801163972
Number of Items 1
UNSPSC Code 31171504

Product Features

Deep groove geometry for high speeds and supporting both radial and axial loads
“Very Light” bearing design for use in limited space applications where shaft sizes are relatively large and the loads are not substantial
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Metal shields on both sides of the bearing keep the lubricant in and contaminants out

Product Description

This FAG Very Light 6000 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and the balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Very Light,” making it applicable for use in limited space applications where shaft sizes are relatively large and the loads are not substantial, and it can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a metal shield on either side that is fastened to the outside ring and extends over the rolling elements. The shields assist in keeping out contaminants such as dirt and grime and also help to hold in lubricant. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.
Specifications Met
Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 6217-2RSR-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 85 mm
Outside Diameter 150 mm
Overall Width 28 mm
Max Rotational Speed 5000 RPM
Static Load Capacity 18700 pounds
Dynamic Load Capacity 14400 pounds
EAN 4012801203555
Number of Items 1
UNSPSC Code 31171504

Product Features

Deep groove geometry for high speeds and supporting both radial and axial loads
“Light” bearing design for use in limited space applications or for average loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Product Description

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Light,” making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.
Specifications Met
Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 6310-2RSR-L038-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 50 mm
Outside Diameter 110 mm
Overall Width 27 mm
Max Rotational Speed 4000 RPM
Static Load Capacity 14000 pounds
Dynamic Load Capacity 8500 pounds
EAN 4012801165518
Number of Items 1
UNSPSC Code 31171504

Product Features

Deep groove geometry for high speeds and supporting both radial and axial loads
“Medium” bearing design for average to above average radial loads and light to average axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Product Description

This FAG Medium 6300 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and the balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Medium,” making it applicable for use with average to above average radial loads and light to average axial loads. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that fastens to the outside ring, extends over the rolling elements, and makes contact with the inside ring to keep out contaminants such as dirt and grime. The seals also hold in a lubricant applied during manufacturing that lasts the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.
Specifications Met
Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number KM3
Material Type Steel
System of Measurement Metric
Bore Diameter 17 mm
Outside Diameter 28 mm
Overall Width 4 mm
EAN 4026677167590
Number of Items 1
Thread Style Right
UNSPSC Code 31170000

Product Features

Locks bearings onto shafts or adapter sleeves so that bearings stay in place
Four evenly spaced slots on circumference for hook or striking-face wrenches to tighten locknut into place
Steel for durability and resistance to deformity under heavy loads
Right-handed with 12 threads per inch
Dimensions and material conform to DIN 981 and ISO 2 982-2 for quality assurance

Product Description

The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistance to deformity under heavy loads. The locknut provides four evenly spaced slots on its circumference for use with hook or striking-face wrenches when tightening into place. The dimensions and materials of the locknut conform to Deutsches Institut für Normung (DIN) 981 and International Organization for Standardization (ISO) 2 982-2 standards for quality assurance.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number MB24
Material Type Steel
System of Measurement Metric
Bore Diameter 120 mm
Outside Diameter 160 mm
Overall Width 2 mm
EAN 4012801052726
Manufacturer Series Number MB Series
Number of Items 1
Style Name External tooth
UNSPSC Code 31170000

Product Features

Lock washer for preventing lock nut (sold separately) from turning
Steel for strength and durability
Interior tab for locking into shaft keyway
Metric unit measurement for industry consistency
Conforms to DIN 5406 standard for main dimensions

Product Description

This FAG MB series steel metric measurement lock washer with interior and exterior tabs is suitable for use in locating a bearing on a shaft or adapter sleeve. This lock washer conforms to Deutsches Institut für Normung (DIN) 5406 standard for main dimensions. The washer has an interior tab that locks into the shaft keyway and exterior tabs that lock the nut (sold separately) in position when one of the washer tabs is bent over into one of the slots around the circumference of the nut.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number KM21
Material Type Steel
System of Measurement Metric
Bore Diameter 105 mm
Outside Diameter 140 mm
Overall Width 12 mm
EAN 4012801222945
Item Weight 1.98 pounds
Number of Items 1
Thread Style Right
UNSPSC Code 31170000

Product Features

Locks bearings onto shafts or adapter sleeves so that bearings stay in place
Four evenly spaced slots on circumference for hook or striking-face wrenches to tighten locknut into place
Steel for durability and resistance to deformity under heavy loads
Right-handed with 12 threads per inch
Dimensions and material conform to DIN 981 and ISO 2 982-2 for quality assurance

Product Description

The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistance to deformity under heavy loads. The locknut provides four evenly spaced slots on its circumference for use with hook or striking-face wrenches when tightening into place. The dimensions and materials of the locknut conform to Deutsches Institut für Normung (DIN) 981 and International Organization for Standardization (ISO) 2 982-2 standards for quality assurance.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number KM11
Material Type Steel
System of Measurement Metric
Bore Diameter 55 mm
Outside Diameter 75 mm
Overall Width 7 mm
EAN 4012801174329
Number of Items 1
Thread Style Right
UNSPSC Code 31170000

Product Features

Locks bearings onto shafts or adapter sleeves so that bearings stay in place
Four evenly spaced slots on circumference for hook or striking-face wrenches to tighten locknut into place
Steel for durability and resistance to deformity under heavy loads
Right-handed with 12 threads per inch
Dimensions and material conform to DIN 981 and ISO 2 982-2 for quality assurance

Product Description

The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistance to deformity under heavy loads. The locknut provides four evenly spaced slots on its circumference for use with hook or striking-face wrenches when tightening into place. The dimensions and materials of the locknut conform to Deutsches Institut für Normung (DIN) 981 and International Organization for Standardization (ISO) 2 982-2 standards for quality assurance.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number KM40
Material Type Steel
System of Measurement Metric
Bore Diameter 200 mm
Outside Diameter 250 mm
Overall Width 18 mm
EAN 4012801223096
Item Weight 8.11 pounds
Number of Items 1
Thread Style Right
UNSPSC Code 31170000

Product Features

Locks bearings onto shafts or adapter sleeves so that bearings stay in place
Four evenly spaced slots on circumference for hook or striking-face wrenches to tighten locknut into place
Steel for durability and resistance to deformity under heavy loads
Right-handed with 12 threads per inch
Dimensions and material conform to DIN 981 and ISO 2 982-2 for quality assurance

Product Description

The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistance to deformity under heavy loads. The locknut provides four evenly spaced slots on its circumference for use with hook or striking-face wrenches when tightening into place. The dimensions and materials of the locknut conform to Deutsches Institut für Normung (DIN) 981 and International Organization for Standardization (ISO) 2 982-2 standards for quality assurance.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number MB11
Material Type Steel
System of Measurement Metric
Bore Diameter 55 mm
Outside Diameter 81 mm
Overall Width 1.5 mm
EAN 4026677180148
Manufacturer Series Number MB Series
Number of Items 1
Style Name External tooth
UNSPSC Code 31170000

Product Features

Lock washer for preventing lock nut (sold separately) from turning
Steel for strength and durability
Interior tab for locking into shaft keyway
Metric unit measurement for industry consistency
Conforms to DIN 5406 standard for main dimensions

Product Description

This FAG MB series steel metric measurement lock washer with interior and exterior tabs is suitable for use in locating a bearing on a shaft or adapter sleeve. This lock washer conforms to Deutsches Institut für Normung (DIN) 5406 standard for main dimensions. The washer has an interior tab that locks into the shaft keyway and exterior tabs that lock the nut (sold separately) in position when one of the washer tabs is bent over into one of the slots around the circumference of the nut.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number KM14
Material Type Steel
System of Measurement Metric
Bore Diameter 70 mm
Outside Diameter 92 mm
Overall Width 8 mm
EAN 4012801174343
Number of Items 1
Thread Style Right
UNSPSC Code 31170000

Product Features

Locks bearings onto shafts or adapter sleeves so that bearings stay in place
Four evenly spaced slots on circumference for hook or striking-face wrenches to tighten locknut into place
Steel for durability and resistance to deformity under heavy loads
Right-handed with 12 threads per inch
Dimensions and material conform to DIN 981 and ISO 2 982-2 for quality assurance

Product Description

The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistance to deformity under heavy loads. The locknut provides four evenly spaced slots on its circumference for use with hook or striking-face wrenches when tightening into place. The dimensions and materials of the locknut conform to Deutsches Institut für Normung (DIN) 981 and International Organization for Standardization (ISO) 2 982-2 standards for quality assurance.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.