Bearing Nachi 6204NR Open C3 Snap Ring Japan 20x47x14 Ball Bearings

Bearing Nachi 6204NR Open C3 Snap Ring Japan 20x47x14 Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9926

Materi/Bahan: steel

Diameter Lubang: 20  mm

Diameter Luar: 47  mm

Lebar Bearing: 14  mm

Kecepatan Rotasi Maksimum: 18000  RPM

Kapasitas Muatan Statis: 6599 newtons

Kapasitas Muatan Dinamis: 12800 newtons

Fitur Produk:

  • Single-row deep groove geometry for high speeds and supporting both radial and axial loads
  • Chrome steel for durability and resistance to deformity under heavy loads
  • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
  • Open bearing for lubrication applied in place
  • Static load rating of 6,600 newtons and dynamic load rating of 12,800 newtons
    • Single-row deep groove geometry for high speeds and supporting both radial and axial loads
    • Chrome steel for durability and resistance to deformity under heavy loads
    • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
    • Open bearing for lubrication applied in place
    • Static load rating of 6,600 newtons and dynamic load rating of 12,800 newtons

Deskripsi:

This Nachi 6204NR ball bearing is made of chrome steel, is unsealed, and has C3 internal clearance and a snap ring. It has a 20 mm inside diameter, a 47 mm outside diameter, and a 14 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is open for lubrication in place. The static load rating is 6,600 newtons and the dynamic load rating is 12,800 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. A snap (retaining) ring located in the groove on the surface of the outer ring provides axial positioning for the bearing. The maximum speed with grease lubrication is 16,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6303 Open C3 Japan 17x47x14 Ball Bearings

Bearing Nachi 6303 Open C3 Japan 17x47x14 Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9868

Materi/Bahan: steel

Diameter Lubang: 17  mm

Diameter Luar: 47  mm

Lebar Bearing: 14  mm

Kecepatan Rotasi Maksimum: 19000  RPM

Kapasitas Muatan Statis: 6550 newtons

Kapasitas Muatan Dinamis: 13600 newtons

Fitur Produk:

  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Chrome bearing steel for durability and resistance to deformity under heavy loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C
  • Open on both sides for lubricating in place

Deskripsi:

This Nachi 6303 ball bearing is made of chrome bearing steel and is open on both sides. It has a 17 mm inside diameter, a 47 mm outside diameter, and a 14 mm depth. The bearing has deep groove geometry for supporting both radial and axial loads and high speeds. The races are made of chrome bearing steel for durability and resistance to deformity under heavy loads. The C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C. The bearing is open on both sides for lubricating in place. The ball is made of chrome bearing steel for strength and resistance to wear and deformation. The static load rating is 6,550 newtons and the dynamic load rating is 13,600 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 16,000 revolutions per minute (rpm). This deep groove ball bearing is used in applications such as electric motors, compressors, and material handling equipment, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6203-2NSE 17x40x12 Sealed C3 Japan Ball Bearings

Bearing Nachi 6203-2NSE 17x40x12 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9704

Diameter Lubang: 17  mm

Diameter Luar: 40  mm

Lebar Bearing: 12  mm

Kapasitas Muatan Statis: 4800 newtons

Kapasitas Muatan Dinamis: 9550 newtons

Fitur Produk:

  • Single-row deep groove geometry for high speeds and supporting both radial and axial loads
  • Chrome steel for durability and resistance to deformity under heavy loads
  • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
  • Rubber seals on both sides of the bearing keep the lubricant in and contaminants out
  • Static load rating of 4,800 newtons and dynamic load rating of 9,550 newtons

Deskripsi:

This Nachi 6203-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 17 mm inside diameter, a 40 mm outside diameter, and a 12 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. The static load rating is 4,800 newtons and the dynamic load rating is 9,550 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 12,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.