Bearing

Bearing dalam Bahasa Indonesia berarti bantalan. Dalam ilmu mekanika bearing adalah sebuah elemen mesin yang berfungsi untuk membatasi gerak relatif antara dua atau lebih komponen mesin agar selalu bergerak pada arah yang diinginkan. Bearing menjaga poros (shaft) agar selalu berputar terhadap sumbu porosnya, atau juga menjaga suatu komponen yang bergerak linier agar selalu berada pada jalurnya.

Image result for bearing adalah

Bantalan merupakan salah satu bagian dari elemen mesin yang memegang peranan cukup penting karena fungsi dari bantalan yaitu untuk menumpu sebuah poros agar poros dapat berputar tanpa mengalami gesekan yang berlebihan. Bantalan harus cukup kuat untuk memungkinkan poros serta elemen mesin lainnya bekerja dengan baik.

Bearing atau laher adalah komponen sebagai bantalan untuk membantu mengurangi gesekan peralatan berputar pada poros/as. Bearing atau laher ini biasanya berbentuk bulat. Bearing di mobil dipasang pada as roda dan ditempat-tempat yang berputar lainnya. Tujuan dari bantaran balock untuk mengurangi gesekan rotasi dan mendukung radial dan aksial beban.

 

FAG 7313B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 65mm ID, 140mm OD, 33mm Width, 5300rpm Maximum Rotational Speed, 18300lbf Static Load Capacity, 23200lbf Dynamic Load Capacity,

FAG 7313B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 65mm ID, 140mm OD, 33mm Width, 5300rpm Maximum Rotational Speed, 18300lbf Static Load Capacity, 23200lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 7313-B-TVP-UA
System of Measurement Metric
Bore Diameter 65  mm
Outside Diameter 140  mm
Overall Width 33  mm
Max Rotational Speed 5300  RPM
Static Load Capacity 18300  pounds
Dynamic Load Capacity 23200  pounds
EAN 4012801207676
Number of Items 1
UNSPSC Code 31171500
FAG QJ208TVP Angular Contact Ball Bearing, Single Row, Open, 35° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 40mm ID, 80mm OD, 18mm Width, 9500rpm Maximum Rotational Speed, 10400lbf Static Load Capacity, 12500lbf Dynamic Load Capacity

FAG QJ208TVP Angular Contact Ball Bearing, Single Row, Open, 35° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 40mm ID, 80mm OD, 18mm Width, 9500rpm Maximum Rotational Speed, 10400lbf Static Load Capacity, 12500lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 35-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 35 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number QJ208-TVP
System of Measurement Metric
Bore Diameter 40  mm
Outside Diameter 80  mm
Overall Width 18  mm
Max Rotational Speed 9500  RPM
Static Load Capacity 10400  pounds
Dynamic Load Capacity 12500  pounds
EAN 4012801012928
Item Weight 14.08 ounces
Number of Items 1
UNSPSC Code 31171500
FAG 7205B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 25mm ID, 52mm OD, 15mm Width, 16000rpm Maximum Rotational Speed, 2000lbf Static Load Capacity, 3200lbf Dynamic Load Capacity,

FAG 7205B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 25mm ID, 52mm OD, 15mm Width, 16000rpm Maximum Rotational Speed, 2000lbf Static Load Capacity, 3200lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7205-B-TVP-UA
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 52  mm
Overall Width 15  mm
Max Rotational Speed 16000  RPM
Static Load Capacity 2000  pounds
Dynamic Load Capacity 3200  pounds
EAN 4012801165907
Number of Items 1
UNSPSC Code 31171500
FAG 7204B-TVP-P5-UL Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 20mm ID, 47mm OD, 14mm Width, 18000rpm Maximum Rotational Speed, 1760lbf Static Load Capacity, 2900lbf Dynamic Load Capacity,

FAG 7204B-TVP-P5-UL Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 20mm ID, 47mm OD, 14mm Width, 18000rpm Maximum Rotational Speed, 1760lbf Static Load Capacity, 2900lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7204-B-TVP-P5-UL
System of Measurement Metric
Bore Diameter 20  mm
Outside Diameter 47  mm
Overall Width 14  mm
Max Rotational Speed 18000  RPM
Static Load Capacity 1760  pounds
Dynamic Load Capacity 2900  pounds
EAN 4012801011839
Number of Items 1
UNSPSC Code 31171500
FAG 7310B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

FAG 7310B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7310-B-TVP-UA
System of Measurement Metric
Bore Diameter 50  mm
Outside Diameter 110  mm
Overall Width 27  mm
Max Rotational Speed 7000  RPM
Static Load Capacity 11400  pounds
Dynamic Load Capacity 16000  pounds
EAN 4012801013314
Number of Items 1
UNSPSC Code 31171500
FAG 7211B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 55mm ID, 100mm OD, 21mm Width, 7000rpm Maximum Rotational Speed, 8150lbf Static Load Capacity, 10400lbf Dynamic Load Capacity,

FAG 7211B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 55mm ID, 100mm OD, 21mm Width, 7000rpm Maximum Rotational Speed, 8150lbf Static Load Capacity, 10400lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7211-B-TVP-UA
System of Measurement Metric
Bore Diameter 55  mm
Outside Diameter 100  mm
Overall Width 21  mm
Max Rotational Speed 7000  RPM
Static Load Capacity 8150  pounds
Dynamic Load Capacity 10400  pounds
EAN 4012801166140
Number of Items 1
UNSPSC Code 31171500
FAG 7214B-MP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 70mm ID, 125mm OD, 24mm Width, 5600rpm Maximum Rotational Speed, 13700lbf Static Load Capacity, 15300lbf Dynamic Load Capacity,

FAG 7214B-MP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 70mm ID, 125mm OD, 24mm Width, 5600rpm Maximum Rotational Speed, 13700lbf Static Load Capacity, 15300lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7214-B-MP-UA
System of Measurement Metric
Bore Diameter 70  mm
Outside Diameter 125  mm
Overall Width 24  mm
Max Rotational Speed 5600  RPM
Static Load Capacity 13700  pounds
Dynamic Load Capacity 15300  pounds
EAN 4012801206884
Item Weight 2.47 pounds
Number of Items 1
UNSPSC Code 31171500
FAG 7314B-MP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 70mm ID, 150mm OD, 35mm Width, 5000rpm Maximum Rotational Speed, 20800lbf Static Load Capacity, 26000lbf Dynamic Load Capacity,

FAG 7314B-MP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Brass Cage, Normal Clearance, Metric, 70mm ID, 150mm OD, 35mm Width, 5000rpm Maximum Rotational Speed, 20800lbf Static Load Capacity, 26000lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7314-B-MP-UA
System of Measurement Metric
Bore Diameter 70  mm
Outside Diameter 150  mm
Overall Width 35  mm
Max Rotational Speed 5000  RPM
Static Load Capacity 20800  pounds
Dynamic Load Capacity 26000  pounds
EAN 4012801207706
Item Weight 6.39 pounds
Number of Items 1
UNSPSC Code 31171500
FAG 7309B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 45mm ID, 100mm OD, 25mm Width, 7500rpm Maximum Rotational Speed, 9000lbf Static Load Capacity, 13400lbf Dynamic Load Capacity,

FAG 7309B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 45mm ID, 100mm OD, 25mm Width, 7500rpm Maximum Rotational Speed, 9000lbf Static Load Capacity, 13400lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7309-B-TVP-UA
System of Measurement Metric
Bore Diameter 45  mm
Outside Diameter 100  mm
Overall Width 25  mm
Max Rotational Speed 7500  RPM
Static Load Capacity 9000  pounds
Dynamic Load Capacity 13400  pounds
EAN 4012801166546
Number of Items 1
UNSPSC Code 31171500
FAG 7310B-JP Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Steel Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

FAG 7310B-JP Angular Contact Ball Bearing, Single Row, Open, 40° Contact Angle, Steel Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

Bearing, Bearing FAG·

Product Description

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
Specifications for this item
Brand Name FAG Bearings
Part Number 7310-B-JP
System of Measurement Metric
Bore Diameter 50  mm
Outside Diameter 110  mm
Overall Width 27  mm
Max Rotational Speed 7000  RPM
Static Load Capacity 11400  pounds
Dynamic Load Capacity 16000  pounds
EAN 4026677045188
Number of Items 1
UNSPSC Code 31171500