Bearing

Bearing dalam Bahasa Indonesia berarti bantalan. Dalam ilmu mekanika bearing adalah sebuah elemen mesin yang berfungsi untuk membatasi gerak relatif antara dua atau lebih komponen mesin agar selalu bergerak pada arah yang diinginkan. Bearing menjaga poros (shaft) agar selalu berputar terhadap sumbu porosnya, atau juga menjaga suatu komponen yang bergerak linier agar selalu berada pada jalurnya.

Image result for bearing adalah

Bantalan merupakan salah satu bagian dari elemen mesin yang memegang peranan cukup penting karena fungsi dari bantalan yaitu untuk menumpu sebuah poros agar poros dapat berputar tanpa mengalami gesekan yang berlebihan. Bantalan harus cukup kuat untuk memungkinkan poros serta elemen mesin lainnya bekerja dengan baik.

Bearing atau laher adalah komponen sebagai bantalan untuk membantu mengurangi gesekan peralatan berputar pada poros/as. Bearing atau laher ini biasanya berbentuk bulat. Bearing di mobil dipasang pada as roda dan ditempat-tempat yang berputar lainnya. Tujuan dari bantaran balock untuk mengurangi gesekan rotasi dan mendukung radial dan aksial beban.

 

FAG 222S-608 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-1/2″ ID, 320mm OD, 131mm Width, 900rpm Maximum Rotational Speed

FAG 222S-608 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-1/2″ ID, 320mm OD, 131mm Width, 900rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-608
System of Measurement Inch/Metric
Bore Diameter 6-1/2  inches
Outside Diameter 320  mm
Overall Width 131  mm
Max Rotational Speed 900  RPM
Static Load Capacity 310000  pounds
Dynamic Load Capacity 216000  pounds
EAN 4012801478786
Item Weight 75.16 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-215 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-15/16″ ID, 150mm OD, 68mm Width, 2200rpm Maximum Rotational Speed

FAG 222S-215 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-15/16″ ID, 150mm OD, 68mm Width, 2200rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-215
System of Measurement Inch/Metric
Bore Diameter 2-15/16  inches
Outside Diameter 150  mm
Overall Width 68  mm
Max Rotational Speed 2200  RPM
Static Load Capacity 53000  pounds
Dynamic Load Capacity 41500  pounds
EAN 4012801478571
Item Weight 9.04 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-315 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 3-15/16″ ID, 200mm OD, 92mm Width, 1500rpm Maximum Rotational Speed

FAG 222S-315 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 3-15/16″ ID, 200mm OD, 92mm Width, 1500rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-315
System of Measurement Inch/Metric
Bore Diameter 3-15/16  inches
Outside Diameter 200  mm
Overall Width 92  mm
Max Rotational Speed 1500  RPM
Static Load Capacity 104000  pounds
Dynamic Load Capacity 80000  pounds
EAN 4012801478649
Item Weight 22.04 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-708 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7-1/2″ ID, 400mm OD, 162mm Width, 560rpm Maximum Rotational Speed

FAG 222S-708 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7-1/2″ ID, 400mm OD, 162mm Width, 560rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-708
System of Measurement Inch/Metric
Bore Diameter 7-1/2  inches
Outside Diameter 400  mm
Overall Width 162  mm
Max Rotational Speed 560  RPM
Static Load Capacity 425000  pounds
Dynamic Load Capacity 300000  pounds
EAN 4026677174611
Item Weight 161.55 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-403 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4-3/16″ ID, 215mm OD, 98mm Width, 1300rpm Maximum Rotational Speed

FAG 222S-403 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4-3/16″ ID, 215mm OD, 98mm Width, 1300rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-403
System of Measurement Inch/Metric
Bore Diameter 4-3/16  inches
Outside Diameter 215  mm
Overall Width 98  mm
Max Rotational Speed 1300  RPM
Static Load Capacity 132000  pounds
Dynamic Load Capacity 102000  pounds
EAN 4012801478663
Item Weight 25.57 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-607 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-7/16″ ID, 320mm OD, 131mm Width, 900rpm Maximum Rotational Speed

FAG 222S-607 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-7/16″ ID, 320mm OD, 131mm Width, 900rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-607
System of Measurement Inch/Metric
Bore Diameter 6-7/16  inches
Outside Diameter 320  mm
Overall Width 131  mm
Max Rotational Speed 900  RPM
Static Load Capacity 310000  pounds
Dynamic Load Capacity 216000  pounds
EAN 4012801478779
Item Weight 79.34 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-211 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-11/16″ ID, 140mm OD, 62mm Width, 2400rpm Maximum Rotational Speed

FAG 222S-211 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-11/16″ ID, 140mm OD, 62mm Width, 2400rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-211
System of Measurement Inch/Metric
Bore Diameter 2-11/16  inches
Outside Diameter 140  mm
Overall Width 62  mm
Max Rotational Speed 2400  RPM
Static Load Capacity 51000  pounds
Dynamic Load Capacity 40500  pounds
EAN 4012801478557
Item Weight 6.61 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-615 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-15/16″ ID, 340mm OD, 142mm Width, 800rpm Maximum Rotational Speed

FAG 222S-615 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-15/16″ ID, 340mm OD, 142mm Width, 800rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-615
System of Measurement Inch/Metric
Bore Diameter 6-15/16  inches
Outside Diameter 340  mm
Overall Width 142  mm
Max Rotational Speed 800  RPM
Static Load Capacity 365000  pounds
Dynamic Load Capacity 255000  pounds
EAN 4012801287630
Item Weight 98.52 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-703 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7-3/16″ ID, 360mm OD, 154mm Width, 600rpm Maximum Rotational Speed

FAG 222S-703 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7-3/16″ ID, 360mm OD, 154mm Width, 600rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-703
System of Measurement Inch/Metric
Bore Diameter 7-3/16  inches
Outside Diameter 360  mm
Overall Width 154  mm
Max Rotational Speed 600  RPM
Static Load Capacity 365000  pounds
Dynamic Load Capacity 255000  pounds
EAN 4012801287647
Item Weight 130.04 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-415 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4-15/16″ ID, 250mm OD, 110mm Width, 1100rpm Maximum Rotational Speed

FAG 222S-415 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4-15/16″ ID, 250mm OD, 110mm Width, 1100rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-415
System of Measurement Inch/Metric
Bore Diameter 4-15/16  inches
Outside Diameter 250  mm
Overall Width 110  mm
Max Rotational Speed 1100  RPM
Static Load Capacity 196000  pounds
Dynamic Load Capacity 143000  pounds
EAN 4012801478694
Item Weight 41.22 pounds
Number of Items 1
UNSPSC Code 31171505