Bearing

Bearing dalam Bahasa Indonesia berarti bantalan. Dalam ilmu mekanika bearing adalah sebuah elemen mesin yang berfungsi untuk membatasi gerak relatif antara dua atau lebih komponen mesin agar selalu bergerak pada arah yang diinginkan. Bearing menjaga poros (shaft) agar selalu berputar terhadap sumbu porosnya, atau juga menjaga suatu komponen yang bergerak linier agar selalu berada pada jalurnya.

Image result for bearing adalah

Bantalan merupakan salah satu bagian dari elemen mesin yang memegang peranan cukup penting karena fungsi dari bantalan yaitu untuk menumpu sebuah poros agar poros dapat berputar tanpa mengalami gesekan yang berlebihan. Bantalan harus cukup kuat untuk memungkinkan poros serta elemen mesin lainnya bekerja dengan baik.

Bearing atau laher adalah komponen sebagai bantalan untuk membantu mengurangi gesekan peralatan berputar pada poros/as. Bearing atau laher ini biasanya berbentuk bulat. Bearing di mobil dipasang pada as roda dan ditempat-tempat yang berputar lainnya. Tujuan dari bantaran balock untuk mengurangi gesekan rotasi dan mendukung radial dan aksial beban.

 

FAG NU2207E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, Normal Clearance, 35mm ID, 72mm OD, 23mm Width

FAG NU2207E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, Normal Clearance, 35mm ID, 72mm OD, 23mm Width

Bearing, Bearing FAG·

Product Features

  • FAG cylindrical roller bearing with polyamide cage and removable inner ring suitable for high radial loads
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Single row roller bearing for high radial loads with low friction
  • Removable inner ring in open bearing allows for lubrication in place
  • Metric unit measurements for industry consistency
Specifications for this item
Brand Name FAG Bearings
Part Number NU2207-E-TVP2
System of Measurement Metric
Bore Diameter 35  mm
Outside Diameter 72  mm
Overall Width 23  mm
Max Rotational Speed 10000  RPM
EAN 4012801179478
Number of Items 1
UNSPSC Code 31171547
FAG NUP2206E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Two Piece, High Capacity, Normal Clearance, Metric, 30mm ID, 62mm OD, 20mm Width

FAG NUP2206E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Two Piece, High Capacity, Normal Clearance, Metric, 30mm ID, 62mm OD, 20mm Width

Bearing, Bearing FAG·

Product Features

  • FAG cylindrical roller bearing with a removable inner ring suitable for high radial loads
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Single row roller bearing for high radial loads with low friction
  • Removable inner ring in open bearing allows for lubrication in place
  • Metric unit measurements for industry consistency
Specifications for this item
Brand Name FAG Bearings
Part Number NUP2206-E-TVP2
System of Measurement Metric
Bore Diameter 30  mm
Outside Diameter 62  mm
Overall Width 20  mm
Max Rotational Speed 12000  RPM
EAN 4012801180184
Item Weight 9.6 ounces
National Stock Number 3110-01-340-4690
Number of Items 1
UNSPSC Code 31171547
FAG 6208-2ZR-C3 Deep Groove Ball Bearing, Single Row, Double Shielded, Steel Cage, C3 Clearance, Metric, 40mm ID, 80mm OD, 18mm Width, 8500rpm Maximum Rotational Speed, 4270lbf Static Load Capacity, 6900lbf Dynamic Load Capacity

FAG 6208-2ZR-C3 Deep Groove Ball Bearing, Single Row, Double Shielded, Steel Cage, C3 Clearance, Metric, 40mm ID, 80mm OD, 18mm Width, 8500rpm Maximum Rotational Speed, 4270lbf Static Load Capacity, 6900lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Deep groove geometry for high speeds and supporting both radial and axial loads
  • “Light” bearing design for use in limited space applications or for average loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Metal shields on both sides of the bearing keep the lubricant in and contaminants out
Specifications for this item
Brand Name FAG Bearings
Part Number 6208-2Z-L038-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 40  mm
Outside Diameter 80  mm
Overall Width 18  mm
Max Rotational Speed 10000  RPM
Static Load Capacity 6900  pounds
Dynamic Load Capacity 4270  pounds
Specification Met DIN 620-4/DIN 623-1/DIN 625-1/DIN ISO 281/EN 10139/ISO 281/ISO 286/ISO 683-17/SAE J403
EAN 4012801070546
Number of Items 1
UNSPSC Code 31171504
FAG 6205-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 15mm Width, 17000rpm Maximum Rotational Speed, 1750lbf Static Load Capacity, 3150lbf Dynamic Load Capacity

FAG 6205-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 15mm Width, 17000rpm Maximum Rotational Speed, 1750lbf Static Load Capacity, 3150lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Deep groove geometry for high speeds and supporting both radial and axial loads
  • “Light” bearing design for use in limited space applications or for average loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Open bearing for lubrication applied in place
Specifications for this item
Brand Name FAG Bearings
Part Number 6205-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 52  mm
Overall Width 15  mm
Max Rotational Speed 15000  RPM
Static Load Capacity 3150  pounds
Dynamic Load Capacity 1750  pounds
Specification Met DIN 620-4/DIN 623-1/DIN 625-1/DIN ISO 281/EN 10139/ISO 281/ISO 286/ISO 683-17/SAE J403
EAN 4012801060929
Number of Items 1
UNSPSC Code 31171504
FAG 6203-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 40mm OD, 12mm Width, 12000rpm Maximum Rotational Speed, 1070lbf Static Load Capacity, 2150lbf Dynamic Load Capacity

FAG 6203-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 40mm OD, 12mm Width, 12000rpm Maximum Rotational Speed, 1070lbf Static Load Capacity, 2150lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Deep groove geometry for high speeds and supporting both radial and axial loads
  • “Light” bearing design for use in limited space applications or for average loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Rubber seals on both sides of the bearing keep the lubricant in and contaminants out
Specifications for this item
Brand Name FAG Bearings
Part Number 6203-2RSR-L038-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 17  mm
Outside Diameter 40  mm
Overall Width 12  mm
Max Rotational Speed 20000  RPM
Static Load Capacity 2150  pounds
Dynamic Load Capacity 1070  pounds
Specification Met DIN 620-4/DIN 623-1/DIN 625-1/DIN ISO 281/EN 10139/ISO 281/ISO 286/ISO 683-17/SAE J403
EAN 4012802651706
Item Weight 2.4 ounces
Number of Items 1
UNSPSC Code 31171504
FAG 33208 Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 40 mm ID, 80mm OD, 32mm Width, 8500rpm Maximum Rotational Speed

FAG 33208 Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 40 mm ID, 80mm OD, 32mm Width, 8500rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Features

  • Cone (inner ring assembly) and cup (outer ring) combine to form a complete single tapered roller bearing
  • Supports high radial loads and axial loads in one direction between a rotating and non-rotating member
  • Operating temperatures range from -30 to 120 degrees C (-22 to 250 degrees F)
  • Sheet steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
Specifications for this item
Brand Name FAG Bearings
Part Number 33208
Material Type Steel
System of Measurement Metric
Bore Diameter 40  mm
Outside Diameter 80  mm
Overall Width 32  mm
Max Rotational Speed 8500  RPM
Number of Items 1
Tolerance Held Standard Tolerance
UNSPSC Code 31171505
FAG 30206A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 30 mm ID, 62mm OD, 17.25mm Width, 12000rpm Maximum Rotational Speed

FAG 30206A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 30 mm ID, 62mm OD, 17.25mm Width, 12000rpm Maximum Rotational Speed

Bearing, Bearing FAG·
Specifications for this item
Brand Name FAG Bearings
Part Number 30206-A
Material Type Steel
System of Measurement Metric
Bore Diameter 30  mm
Outside Diameter 62  mm
Overall Width 17.25  mm
Max Rotational Speed 12000  RPM
EAN 4012801037761
Number of Items 1
Tolerance Held Standard Tolerance
UNSPSC Code 31171505
FAG 20208T-C3 Spherical Barrel Roller Bearing, Polyamide/Nylon Cage, C3 Clearance, Metric, 40mm ID, 80mm OD, 18mm Width, 4300rpm Maximum Rotational Speed

FAG 20208T-C3 Spherical Barrel Roller Bearing, Polyamide/Nylon Cage, C3 Clearance, Metric, 40mm ID, 80mm OD, 18mm Width, 4300rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Features

  • Single row, self-aligning spherical barrel roller bearing suitable for applications that support high radial shock loads and maximum misalignment adjustment
  • Polyamide and nylon window-type cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Ribbed inner ring for cage guide
  • C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 20208-TVP-C3
System of Measurement Metric
Bore Diameter 40  mm
Outside Diameter 80  mm
Overall Width 18  mm
Max Rotational Speed 4300  RPM
Specification Met DIN 623-1/DIN ISO 281/ISO 199/ISO 281/ISO 683-17
EAN 4012801285803
Number of Items 1
UNSPSC Code 31171505
FAG 31313A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 65 mm ID, 140mm OD, 36mm Width, Maximum Rotational Speed

FAG 31313A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 65 mm ID, 140mm OD, 36mm Width, Maximum Rotational Speed

Bearing, Bearing FAG·

Product Features

  • Cone (inner ring assembly) and cup (outer ring) combine to form a complete single tapered roller bearing
  • Supports high radial loads and axial loads in one direction between a rotating and non-rotating member
  • Operating temperatures range from -30 to 120 degrees C (-22 to 250 degrees F)
  • Sheet steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
Specifications for this item
Brand Name FAG Bearings
Part Number 31313-A
Material Type Steel
System of Measurement Metric
Bore Diameter 65  mm
Outside Diameter 140  mm
Overall Width 36  mm
EAN 4012801048781
Item Weight 5 pounds
Number of Items 1
Tolerance Held Standard Tolerance
UNSPSC Code 31171505