Tag: FAG

FAG 223140 Spherical Roller Bearing, Straight Bore, Steel Cage, Normal Clearance, Metric, 70mm ID, 150mm OD, 51mm Width, 4500rpm Maximum Rotational Speed, 87676 lbf Static Load Capacity, 87676 lbf Dynamic Load Capacity

FAG 223140 Spherical Roller Bearing, Straight Bore, Steel Cage, Normal Clearance, Metric, 70mm ID, 150mm OD, 51mm Width, 4500rpm Maximum Rotational Speed, 87676 lbf Static Load Capacity, 87676 lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a CN radial clearance, an outer ring with lubrication groove and three oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
  • Pressed steel cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • P5 precision on rings and hardened inner ring
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 22314-E1
System of Measurement Metric
Bore Diameter 70  mm
Outside Diameter 150  mm
Overall Width 51  mm
Max Rotational Speed 4500  RPM
Static Load Capacity 87676  pounds
Dynamic Load Capacity 87676  pounds
Specification Met DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17
EAN 4026677808486
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22212E1-C3 Spherical Roller Bearing, Straight Bore, Steel Cage, C3 Clearance, Metric, 60mm ID, 110mm OD, 28mm Width, 7500rpm Maximum Rotational Speed, 37319 lbf Static Load Capacity, 38218 lbf Dynamic Load Capacity

FAG 22212E1-C3 Spherical Roller Bearing, Straight Bore, Steel Cage, C3 Clearance, Metric, 60mm ID, 110mm OD, 28mm Width, 7500rpm Maximum Rotational Speed, 37319 lbf Static Load Capacity, 38218 lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a C3 radial clearance, an outer ring with lubrication groove and 3 oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
  • Pressed steel cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • P5 precision on rings and hardened inner ring
  • C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 22212-E1-C3
System of Measurement Metric
Bore Diameter 60  mm
Outside Diameter 110  mm
Overall Width 28  mm
Max Rotational Speed 7500  RPM
Static Load Capacity 37319  pounds
Dynamic Load Capacity 38218  pounds
Specification Met DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17
EAN 4026677805027
Item Weight 2.34 pounds
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22218E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 90mm ID, 160mm OD, 40mm Width, 4800rpm Maximum Rotational Speed, 375kN Static Load Capacity, 345kN Dynamic Load Capacity

FAG 22218E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 90mm ID, 160mm OD, 40mm Width, 4800rpm Maximum Rotational Speed, 375kN Static Load Capacity, 345kN Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place
Specifications for this item
Brand Name FAG Bearings
Part Number 22218-E1A-K-M-C3
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 90  mm
Outside Diameter 160  mm
Overall Width 40  mm
Max Rotational Speed 4800  RPM
Static Load Capacity 375  Kilonewtons
Dynamic Load Capacity 345  Kilonewtons
Specification Met DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN 4026677850478
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22328E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 140mm ID, 300mm OD, 102mm Width, 2200rpm Maximum Rotational Speed, 1630kN Static Load Capacity, 1460kN Dynamic Load Capacity

FAG 22328E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 140mm ID, 300mm OD, 102mm Width, 2200rpm Maximum Rotational Speed, 1630kN Static Load Capacity, 1460kN Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
  • Straight bore for fitting to a conventional cylindrical shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place
Specifications for this item
Brand Name FAG Bearings
Part Number 22328-E1A-M-C3
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 140  mm
Outside Diameter 300  mm
Overall Width 102  mm
Max Rotational Speed 2200  RPM
Static Load Capacity 1630  Kilonewtons
Dynamic Load Capacity 1460  Kilonewtons
Specification Met DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN 4026677850065
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22206E1K-C3 Spherical Roller Bearing, Tapered Bore, Steel Cage, C3 Clearance, Metric, 30mm ID, 62mm OD, 20mm Width

FAG 22206E1K-C3 Spherical Roller Bearing, Tapered Bore, Steel Cage, C3 Clearance, Metric, 30mm ID, 62mm OD, 20mm Width

Bearing, Bearing FAG·

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a C3 radial clearance, an outer ring with lubrication groove and three oil holes, and a 1:12 tapered bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s 1:12 taper compensates for flexing shafts and fits tapered shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
  • Pressed steel cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • P5 precision on rings and hardened inner ring
  • C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
  • Bore with 1:12 taper compensates for flexing shafts and fits tapered shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 22206-E1-K-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 30  mm
Outside Diameter 62  mm
Overall Width 20  mm
Specification Met DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17
EAN 4026677870384
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22213E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 65mm ID, 120mm OD, 31mm Width, 6700rpm Maximum Rotational Speed, 208kN Static Load Capacity, 200kN Dynamic Load Capacity

FAG 22213E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 65mm ID, 120mm OD, 31mm Width, 6700rpm Maximum Rotational Speed, 208kN Static Load Capacity, 200kN Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place
Specifications for this item
Brand Name FAG Bearings
Part Number 22213-E1A-K-M-C3
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 65  mm
Outside Diameter 120  mm
Overall Width 31  mm
Max Rotational Speed 6700  RPM
Static Load Capacity 208  Kilonewtons
Dynamic Load Capacity 200  Kilonewtons
Specification Met DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN 4026677847300
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22214E1AK-M Spherical Roller Bearing, Tapered Bore, Brass Cage, Normal Clearance, Metric, 70mm ID, 125mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 228kN Static Load Capacity, 212kN Dynamic Load Capacity

FAG 22214E1AK-M Spherical Roller Bearing, Tapered Bore, Brass Cage, Normal Clearance, Metric, 70mm ID, 125mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 228kN Static Load Capacity, 212kN Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a CN (normal) radial internal clearance designation making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
CN radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place
Specifications for this item
Brand Name FAG Bearings
Part Number 22214-E1A-K-M
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 70  mm
Outside Diameter 125  mm
Overall Width 31  mm
Max Rotational Speed 6300  RPM
Static Load Capacity 228  Kilonewtons
Dynamic Load Capacity 212  Kilonewtons
Specification Met DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN 4026677849236
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22316E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 80mm ID, 170mm OD, 58mm Width, 4300rpm Maximum Rotational Speed, 510kN Static Load Capacity, 500kN Dynamic Load Capacity

FAG 22316E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 80mm ID, 170mm OD, 58mm Width, 4300rpm Maximum Rotational Speed, 510kN Static Load Capacity, 500kN Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
  • Straight bore for fitting to a conventional cylindrical shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place
Specifications for this item
Brand Name FAG Bearings
Part Number 22316-E1A-M-C3
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 80  mm
Outside Diameter 170  mm
Overall Width 58  mm
Max Rotational Speed 4300  RPM
Static Load Capacity 510  Kilonewtons
Dynamic Load Capacity 500  Kilonewtons
Specification Met DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN 4026677848079
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22205E1K-C3 Spherical Roller Bearing, Tapered Bore, Steel Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 18mm Width

FAG 22205E1K-C3 Spherical Roller Bearing, Tapered Bore, Steel Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 18mm Width

Bearing, Bearing FAG·

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a C3 radial clearance, an outer ring with lubrication groove and three oil holes, and a 1:12 tapered bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s 1:12 taper compensates for flexing shafts and fits tapered shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
  • Pressed steel cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • P5 precision on rings and hardened inner ring
  • C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
  • Bore with 1:12 taper compensates for flexing shafts and fits tapered shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 22205-E1-K-C3
Material Type Steel
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 52  mm
Overall Width 18  mm
Specification Met DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17
EAN 4026677808066
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505
FAG 22215E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 75mm ID, 130mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 236kN Static Load Capacity, 216kN Dynamic Load Capacity

FAG 22215E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 75mm ID, 130mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 236kN Static Load Capacity, 216kN Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
  • Straight bore for fitting to a conventional cylindrical shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place
Specifications for this item
Brand Name FAG Bearings
Part Number 22215-E1A-M-C3
Material Type Brass/Bronze Cage
System of Measurement Metric
Bore Diameter 75  mm
Outside Diameter 130  mm
Overall Width 31  mm
Max Rotational Speed 6300  RPM
Static Load Capacity 236  Kilonewtons
Dynamic Load Capacity 216  Kilonewtons
Specification Met DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN 4026677847201
Manufacturer Series Number E1 Series
Number of Items 1
UNSPSC Code 31171505