Bearing Nachi 6303-2NSE 17x47x14 Sealed C3 Japan Ball Bearings

Bearing Nachi 6303-2NSE 17x47x14 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9728

Materi/Bahan: steel

Diameter Lubang: 17  mm

Diameter Luar: 47  mm

Lebar Bearing: 14  mm

Kapasitas Muatan Statis: 6550  Newtons

Kapasitas Muatan Dinamis: 13600  Newtons

Fitur Produk:

  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Chrome bearing steel for durability and resistance to deformity under heavy loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C
  • Rubber seals on both sides to keep lubricant in and contaminants out

Deskripsi:

This Nachi 6303-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 17 mm inside diameter, a 47 mm outside diameter, and a 14 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds. The races are made of chrome bearing steel for durability and resistance to deformity under heavy loads. The C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C. Rubber seals on both sides of the bearing help retain lubricant and exclude contaminants. The ball is made of chrome bearing steel for strength and resistance to wear and deformation. The static load rating is 6,550 newtons and the dynamic load rating is 13,600 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 11,000 revolutions per minute (rpm). This deep groove ball bearing is used in applications such as electric motors, compressors, and material handling equipment, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6204-2NSE 20x47x14 Sealed C3 Japan Ball Bearings

Bearing Nachi 6204-2NSE 20x47x14 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9705

Materi/Bahan: steel

Diameter Lubang: 20  mm

Diameter Luar: 7  mm

Lebar Bearing: 14  mm

Kapasitas Muatan Statis: 6600  Newtons

Kapasitas Muatan Dinamis: 12800  Newtons

Fitur Produk:

  • Single-row bearing for supporting radial loads
  • C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
  • Sealed to keep lubricant in and contaminants out

Deskripsi:

This 6204-2NSE Nachi bearing is a sealed ball bearing with C3 clearance measuring 20x47x14. This single-row bearing is built to support radial loads. It has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. This bearing is sealed to keep lubricants in and contaminants out.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 7206 Angular Contact Bearing 30x62x16:Steel Cage:C3:Japan

Bearing Nachi 7206 Angular Contact Bearing 30x62x16:Steel Cage:C3:Japan

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT10016

Materi/Bahan: steel

Sistem pengukuran: chrome steel

Diameter Lubang: 30 mm

Diameter Luar: 62  mm

Lebar Bearing: 62  mm

Kecepatan Rotasi Maksimum: 13000  RPM

Kapasitas Muatan Statis: 14800  Newtons

Kapasitas Muatan Dinamis: 22500  Newtons

Fitur Produk:

  • Single-row angular contact ball bearing, supporting moderate one-directional thrust loads, and combined loads where thrust load is predominant
  • Ball contact angle of 30 degrees relative to the inner and outer raceways increases thrust load capacity
  • Open configuration for lubrication applied in place
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • C3 axial internal clearance is larger than normal allowing for thermal expansion

Deskripsi:

The Nachi 7206 single-row angular contact ball bearing is an open bearing and has a 30-degree contact angle, pressed steel cage, and C3 clearance rating. It supports moderate one-directional thrust loads, and combined radial and thrust loads where the thrust load is predominant. The 7200 series has a smaller cross section than the 7300 series, making it suitable for smaller spaces, lighter loads, and higher speeds. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 30-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a C3 axial internal clearance designation to indicate that the axial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. Additionally, this bearing is produced to normal tolerances in accordance with International Organization for Standardization (ISO) 492:2002 standards for quality assurance. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Nachi-Fujikoshi manufactures bearings, cutting tools, hydraulic equipment, and high speed steel for industrial applications. The company, founded in 1928, is headquartered in Toyama, Japan.

Bearing Nachi 6205 25x52x15:Open:C3:Japan

Bearing Nachi 6205 25x52x15:Open:C3:Japan

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9837

Materi/Bahan: steel

Sistem pengukuran: metric

Diameter Lubang: 25  mm

Diameter Luar: 52  mm

Lebar Bearing: 15  mm

Kecepatan Rotasi Maksimum: 16000  RPM

Kapasitas Muatan Statis:  7900  Newtons

Kapasitas Muatan Dinamis: 14000  Newtons

Fitur Produk:

  • Single-row deep groove geometry for high speeds and supporting both radial and axial loads
  • Chrome steel for durability and resistance to deformity under heavy loads
  • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
  • Open bearing for lubrication applied in place
  • Static load rating of 7,900 newtons and dynamic load rating of 14,000 newtons

Deskripsi:

This Nachi 6205 ball bearing is made of chrome steel, is unsealed, and has C3 internal clearance. It has a 25 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is open for lubrication in place. The static load rating is 7,900 newtons and the dynamic load rating is 14,000 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 13,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6202-2NSE 15x35x11 Sealed C3 Japan Ball Bearings

Bearing Nachi 6202-2NSE 15x35x11 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9703

Materi/Bahan: steel

Diameter Lubang: 15  mm

Diameter Luar: 35  mm

Lebar Bearing: 11  mm

Kapasitas Muatan Statis: 3700  Newtons

Kapasitas Muatan Dinamis: 7650  Newtons

Fitur Produk:

  • Single-row bearing for supporting radial loads
  • C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
  • Sealed to keep lubricant in and contaminants out

Deskripsi:

This 6202-2NSE Nachi bearing is a sealed ball bearing with C3 clearance measuring 15x35x11. This single-row bearing is built to support radial loads. It has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. This bearing is sealed to keep lubricants in and contaminants out.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6004-2NSE  20x42x12 Sealed C3 Japan Ball Bearings

Bearing Nachi 6004-2NSE 20x42x12 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9679

Materi/Bahan: steel

Diameter Lubang: 20  mm

Diameter Luar: 42  mm

Lebar Bearing: 12  mm

Kapasitas Muatan Statis: 5000  Newtons

Kapasitas Muatan Dinamis: 9400  Newtons

Fitur Produk:

  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Chrome bearing steel for durability and resistance to deformity under heavy loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C
  • Rubber seals on both sides to keep lubricant in and contaminants out

Deskripsi:

This Nachi 6004-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 20 mm inside diameter, a 42 mm outside diameter, and a 12 mm depth. The bearing has deep groove geometry for supporting both radial and axial loads and high speeds. The races are made of chrome bearing steel for durability and resistance to deformity under heavy loads. The C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C. Rubber seals on both sides of the bearing help retain lubricant and exclude contaminants. The ball is made of chrome bearing steel for strength and resistance to wear and deformation. The static load rating is 5,000 newtons and the dynamic load rating is 9,400 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 11,000 revolutions per minute (rpm). This deep groove ball bearing is used in applications such as electric motors, compressors, and material handling equipment, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi  6205-2NSE25x52x15 Sealed C3 Japan Ball Bearings

Bearing Nachi 6205-2NSE25x52x15 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9706

Materi/Bahan: steel

Diameter Lubang: 25  mm

Diameter Luar: 52  mm

Lebar Bearing: 15  mm

Kapasitas Muatan Statis: 7900  Newtons

Kapasitas Muatan Dinamis: 14000  Newtons

Fitur Produk:

  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Chrome bearing steel for durability and resistance to deformity under heavy loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C
  • Rubber seals on both sides to keep lubricant in and contaminants out

Deskripsi:

This Nachi 6205-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 25 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. The bearing has deep groove geometry for supporting both radial and axial loads and high speeds. The races are made of chrome bearing steel for durability and resistance to deformity under heavy loads. The C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C. Rubber seals on both sides of the bearing help retain lubricant and exclude contaminants. The ball is made of chrome bearing steel for strength and resistance to wear and deformation. The static load rating is 7,900 newtons and the dynamic load rating is 14,000 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 9,000 revolutions per minute (rpm). This deep groove ball bearing is used in applications such as electric motors, compressors, and material handling equipment, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6206-2NSE 30x62x16 Sealed C3 Japan Ball Bearings

Bearing Nachi 6206-2NSE 30x62x16 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9707

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 62  mm

Lebar Bearing: 16  mm

Kapasitas Muatan Statis: 11300  Newtons

Kapasitas Muatan Dinamis: 19500  Newtons

Fitur Produk:

  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Chrome bearing steel for durability and resistance to deformity under heavy loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C
  • Rubber seals on both sides to keep lubricant in and contaminants out

Deskripsi:

This Nachi 6206-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 30 mm inside diameter, a 62 mm outside diameter, and a 16 mm depth. The bearing has deep groove geometry for supporting both radial and axial loads and high speeds. The races are made of chrome bearing steel for durability and resistance to deformity under heavy loads. The C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C. Rubber seals on both sides of the bearing help retain lubricant and exclude contaminants. The ball is made of chrome bearing steel for strength and resistance to wear and deformation. The static load rating is 11,300 newtons and the dynamic load rating is 19,500 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 7,500 revolutions per minute (rpm). This deep groove ball bearing is used in applications such as electric motors, compressors, and material handling equipment, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi 6304-2NSE 20x52x15 Sealed C3 Japan Ball Bearings

Bearing Nachi 6304-2NSE 20x52x15 Sealed C3 Japan Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9729

Materi/Bahan:  steel

Diameter Lubang: 20  mm

Diameter Luar: 52  mm

Lebar Bearing: 15  mm

Kapasitas Muatan Statis: 7900  Newtons

Kapasitas Muatan Dinamis: 15900  Newtons

Fitur Produk:

  • Single-row deep groove geometry for high speeds and supporting both radial and axial loads
  • Chrome steel for durability and resistance to deformity under heavy loads
  • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
  • Rubber seals on both sides of the bearing keep the lubricant in and contaminants out
  • Static load rating of 7,900 newtons and dynamic load rating of 15,900 newtons

Deskripsi:

This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. The static load rating is 7,900 newtons and the dynamic load rating is 15,900 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 10,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Bearing Nachi  6203NR Open C3 Snap Ring Japan 17x40x12 Ball Bearings

Bearing Nachi 6203NR Open C3 Snap Ring Japan 17x40x12 Ball Bearings

Merk: Bearing Nachi

Nomor/Jenis Sparepart: KIT9925

Materi/Bahan: steel

Diameter Lubang: 17  mm

Diameter Luar: 40  mm

Lebar Bearing: 12  mm

Kecepatan Rotasi Maksimum: 21000  RPM

Kapasitas Muatan Statis: 4799 newtons

Kapasitas Muatan Dinamis: 9550 newtons

Fitur Produk:

  • Single-row deep groove geometry for high speeds and supporting both radial and axial loads
  • Chrome steel for durability and resistance to deformity under heavy loads
  • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
  • Open bearing for lubrication applied in place
  • Static load rating of 4,800 newtons and dynamic load rating of 9,550 newtons

Deskripsi:

This Nachi 6203NR ball bearing is made of chrome steel, is unsealed, and has C3 internal clearance and a snap ring. It has a 17 mm inside diameter, a 40 mm outside diameter, and a 12 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is open for lubrication in place. The static load rating is 4,800 newtons and the dynamic load rating is 9,550 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. A snap (retaining) ring located in the groove on the surface of the outer ring provides axial positioning for the bearing. The maximum speed with grease lubrication is 18,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.