Bearing FAG

FAG 222S-600 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6″ ID, 310mm OD, 128mm Width, 900rpm Maximum Rotational Speed

FAG 222S-600 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6″ ID, 310mm OD, 128mm Width, 900rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-600
System of Measurement Inch/Metric
Bore Diameter 6  inches
Outside Diameter 310  mm
Overall Width 128  mm
Max Rotational Speed 900  RPM
Static Load Capacity 310000  pounds
Dynamic Load Capacity 216000  pounds
EAN 4012801478762
Item Weight 74.72 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-500 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 5″ ID, 250mm OD, 110mm Width, 1100rpm Maximum Rotational Speed

FAG 222S-500 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 5″ ID, 250mm OD, 110mm Width, 1100rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-500
System of Measurement Inch/Metric
Bore Diameter 5  inches
Outside Diameter 250  mm
Overall Width 110  mm
Max Rotational Speed 1100  RPM
Static Load Capacity 196000  pounds
Dynamic Load Capacity 143000  pounds
EAN 4012801478717
Item Weight 40.11 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-715 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7-15/16″ ID, 400mm OD, 162mm Width, 560rpm Maximum Rotational Speed

FAG 222S-715 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7-15/16″ ID, 400mm OD, 162mm Width, 560rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-715
System of Measurement Inch/Metric
Bore Diameter 7-15/16  inches
Outside Diameter 400  mm
Overall Width 162  mm
Max Rotational Speed 560  RPM
Static Load Capacity 425000  pounds
Dynamic Load Capacity 300000  pounds
EAN 4012801287654
Item Weight 168.61 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-408 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4-1/2″ ID, 230mm OD, 104mm Width, 1200rpm Maximum Rotational Speed

FAG 222S-408 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4-1/2″ ID, 230mm OD, 104mm Width, 1200rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-408
System of Measurement Inch/Metric
Bore Diameter 4-1/2  inches
Outside Diameter 230  mm
Overall Width 104  mm
Max Rotational Speed 1200  RPM
Static Load Capacity 163000  pounds
Dynamic Load Capacity 120000  pounds
EAN 4012801478687
Item Weight 31.08 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-400 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4″ ID, 200mm OD, 92mm Width, 1500rpm Maximum Rotational Speed

FAG 222S-400 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 4″ ID, 200mm OD, 92mm Width, 1500rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-400
System of Measurement Inch/Metric
Bore Diameter 4  inches
Outside Diameter 200  mm
Overall Width 92  mm
Max Rotational Speed 1500  RPM
Static Load Capacity 104000  pounds
Dynamic Load Capacity 80000  pounds
EAN 4012801478656
Number of Items 1
UNSPSC Code 31171505
FAG 222S-300 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 3″ ID, 150mm OD, 68mm Width, 2200rpm Maximum Rotational Speed

FAG 222S-300 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 3″ ID, 150mm OD, 68mm Width, 2200rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-300
System of Measurement Inch/Metric
Bore Diameter 3  inches
Outside Diameter 150  mm
Overall Width 68  mm
Max Rotational Speed 2200  RPM
Static Load Capacity 53000  pounds
Dynamic Load Capacity 41500  pounds
EAN 4012801478588
Item Weight 9.04 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-207 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-7/16″ ID, 130mm OD, 60mm Width, 2400rpm Maximum Rotational Speed

FAG 222S-207 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-7/16″ ID, 130mm OD, 60mm Width, 2400rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-207
System of Measurement Inch
Bore Diameter 2-7/16  inches
Outside Diameter 130  mm
Overall Width 60  mm
Max Rotational Speed 2400  RPM
Static Load Capacity 47500  pounds
Dynamic Load Capacity 39000  pounds
EAN 4012801478533
Number of Items 1
UNSPSC Code 31171505
FAG 222S-700 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7″ ID, 340mm OD, 142mm Width, 800rpm Maximum Rotational Speed

FAG 222S-700 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 7″ ID, 340mm OD, 142mm Width, 800rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 222S-700
System of Measurement Inch/Metric
Bore Diameter 7  inches
Outside Diameter 340  mm
Overall Width 142  mm
Max Rotational Speed 800  RPM
Static Load Capacity 365000  pounds
Dynamic Load Capacity 255000  pounds
EAN 4026677174604
Number of Items 1
UNSPSC Code 31171505
FAG 222S-608 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-1/2″ ID, 320mm OD, 131mm Width, 900rpm Maximum Rotational Speed

FAG 222S-608 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 6-1/2″ ID, 320mm OD, 131mm Width, 900rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-608
System of Measurement Inch/Metric
Bore Diameter 6-1/2  inches
Outside Diameter 320  mm
Overall Width 131  mm
Max Rotational Speed 900  RPM
Static Load Capacity 310000  pounds
Dynamic Load Capacity 216000  pounds
EAN 4012801478786
Item Weight 75.16 pounds
Number of Items 1
UNSPSC Code 31171505
FAG 222S-215 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-15/16″ ID, 150mm OD, 68mm Width, 2200rpm Maximum Rotational Speed

FAG 222S-215 Split Spherical Roller Bearing, Polyamide Cage, Normal Clearance, 2-15/16″ ID, 150mm OD, 68mm Width, 2200rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Description

This FAG split spherical roller bearing has a polyamide cage, a CN radial clearance, and a straight bore suitable for applications that support radial and oscillating axial loads and in which bearing replacement is difficult, such as in trough conveyors. The polyamide cage is lightweight, spaces the rollers for even load distribution, and prevents contact to reduce friction, vibration, and noise. This bearing’s inner and outer ring halves bolt together, allowing the bearing to be replaced without removing the shaft that the bearing supports. This roller bearing’s CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets Deutsches Institut für Normung (DIN) standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment.

Specifications

Main bearing dimensions ISO 15:1998
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances ISO 492:2002
Steel composition for inner and outer rings and rollers ISO 683-17
System for creating part numbers DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

  • Two row split spherical roller bearing suitable for applications that support high radial and oscillating axial loads
  • Polyamide cage is lightweight and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
  • Inner and outer ring halves bolt together for ease of installation
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Straight bore fits conventional cylindrical shafts
Specifications for this item
Brand Name FAG Bearings
Part Number 222S-215
System of Measurement Inch/Metric
Bore Diameter 2-15/16  inches
Outside Diameter 150  mm
Overall Width 68  mm
Max Rotational Speed 2200  RPM
Static Load Capacity 53000  pounds
Dynamic Load Capacity 41500  pounds
EAN 4012801478571
Item Weight 9.04 pounds
Number of Items 1
UNSPSC Code 31171505