Bearing FAG

FAG 30206A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 30 mm ID, 62mm OD, 17.25mm Width, 12000rpm Maximum Rotational Speed

FAG 30206A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 30 mm ID, 62mm OD, 17.25mm Width, 12000rpm Maximum Rotational Speed

Bearing, Bearing FAG·

Product Features

  • Cone (inner ring assembly) and cup (outer ring) combine to form a complete single tapered roller bearing
  • Supports high radial loads and axial loads in one direction between a rotating and non-rotating member
  • Operating temperatures range from -30 to 120 degrees C (-22 to 250 degrees F)
  • Sheet steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
Specifications for this item
Brand Name FAG Bearings
Part Number 30206-A
Material Type Steel
System of Measurement Metric
Bore Diameter 30  mm
Outside Diameter 62  mm
Overall Width 17.25  mm
Max Rotational Speed 12000  RPM
EAN 4012801037761
Number of Items 1
Tolerance Held Standard Tolerance
UNSPSC Code 31171505
FAG 53205 Self-Aligning Thrust Bearing, Single Row, 90° Contact Angle, Open, Metric, 25mm ID, 47mm OD, 16.7mm Width, 5000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 6200lbf Dynamic Load Capacity

FAG 53205 Self-Aligning Thrust Bearing, Single Row, 90° Contact Angle, Open, Metric, 25mm ID, 47mm OD, 16.7mm Width, 5000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 6200lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG single-row self-aligning thrust ball bearing has a 90-degree contact angle and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a spherical housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The bearing is self-aligning with a spherical-shaped housing washer that helps compensate for static angular misalignments between the shaft and housing. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications

Main bearing dimensions DIN 711/ISO 104
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 53205
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 47  mm
Overall Width 16.7  mm
Max Rotational Speed 5000  RPM
Static Load Capacity 11400  pounds
Dynamic Load Capacity 6200  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 104/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801162906
Number of Items 1
UNSPSC Code 31171552
FAG 52306 Double Direction Thrust Bearing, Double Row, Open, 90° Contact Angle, Steel Cage, Metric, 25mm ID, 60mm OD, 38mm Width, 4000rpm Maximum Rotational Speed, 14600lbf Static Load Capacity, 8500lbf Dynamic Load Capacity

FAG 52306 Double Direction Thrust Bearing, Double Row, Open, 90° Contact Angle, Steel Cage, Metric, 25mm ID, 60mm OD, 38mm Width, 4000rpm Maximum Rotational Speed, 14600lbf Static Load Capacity, 8500lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double-row, double-direction thrust ball bearing has a 90-degree contact angle, steel cages, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in both directions and no radial loads. This deep-groove thrust ball bearing consists of two housing locating washers (rings), a shaft locating washer, and two ball and cage assemblies. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The double-row design supports bidirectional thrust loads with minimum axial deflection, increasing the load carrying capacity, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 52306
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 60  mm
Overall Width 38  mm
Max Rotational Speed 4000  RPM
Static Load Capacity 14600  pounds
Dynamic Load Capacity 8500  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801162685
Number of Items 1
UNSPSC Code 31171552
FAG 52206 Double Direction Thrust Bearing, Double Row, Open, 90° Contact Angle, Steel Cage, Metric, 25mm ID, 52mm OD, 29mm Width, 4800rpm Maximum Rotational Speed, 10600lbf Static Load Capacity, 5700lbf Dynamic Load Capacity

FAG 52206 Double Direction Thrust Bearing, Double Row, Open, 90° Contact Angle, Steel Cage, Metric, 25mm ID, 52mm OD, 29mm Width, 4800rpm Maximum Rotational Speed, 10600lbf Static Load Capacity, 5700lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG double-row, double-direction thrust ball bearing has a 90-degree contact angle, steel cages, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in both directions and no radial loads. This deep-groove thrust ball bearing consists of two housing locating washers (rings), a shaft locating washer, and two ball and cage assemblies. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The double-row design supports bidirectional thrust loads with minimum axial deflection, increasing the load carrying capacity, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 52206
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 52  mm
Overall Width 29  mm
Max Rotational Speed 4800  RPM
Static Load Capacity 10600  pounds
Dynamic Load Capacity 5700  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801162623
Number of Items 1
UNSPSC Code 31171552
FAG 51108 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 40mm ID, 60mm OD, 13mm Width, 4500rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 5200lbf Dynamic Load Capacity

FAG 51108 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 40mm ID, 60mm OD, 13mm Width, 4500rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 5200lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Description

This FAG single-row thrust ball bearing has grooved raceways, a 90-degree contact angle, a steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications

Main bearing dimensions DIN 711/ISO 104
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Specifications for this item
Brand Name FAG Bearings
Part Number 51108
System of Measurement Metric
Bore Diameter 40  mm
Outside Diameter 60  mm
Overall Width 13  mm
Max Rotational Speed 4500  RPM
Static Load Capacity 11400  pounds
Dynamic Load Capacity 5200  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 104/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801162203
National Stock Number 3110-01-057-9563
Number of Items 1
UNSPSC Code 31171552
FAG 51205 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 25mm ID, 47mm OD, 15mm Width, 5000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 6200lbf Dynamic Load Capacity

FAG 51205 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 25mm ID, 47mm OD, 15mm Width, 5000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 6200lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction
  • Open bearing for lubrication applied in place
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise
  • Grooved raceways for higher speeds and thrust-bearing capacity than flat washers
Specifications for this item
Brand Name FAG Bearings
Part Number 51205
System of Measurement Metric
Bore Diameter 25  mm
Outside Diameter 47  mm
Overall Width 15  mm
Max Rotational Speed 5000  RPM
Static Load Capacity 11400  pounds
Dynamic Load Capacity 6200  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 104/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801016452
Number of Items 1
UNSPSC Code 31171552
FAG 3305B-2RSR-TVH Ball Bearing, Double Row, Double Sealed, 25° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 25mm ID, 62mm OD, 1″ Width, 6700rpm Maximum Rotational Speed, 4500lbf Static Load Capacity, 6700lbf Dynamic Load Capacity

FAG 3305B-2RSR-TVH Ball Bearing, Double Row, Double Sealed, 25° Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 25mm ID, 62mm OD, 1″ Width, 6700rpm Maximum Rotational Speed, 4500lbf Static Load Capacity, 6700lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Double-row angular contact ball bearing for limited-space applications supporting radial loads, bidirectional thrust loads, and combined loads
  • Ball contact angle of 30 degrees relative to the inner and outer raceways increases thrust load capacity
  • Lip seals on both sides of the bearing keep lubricant in and contaminants out
  • Glass fiber reinforced polyamide 66 plastic cage evenly spaces balls for reduced friction, vibration, and noise
  • P6 precision rating for high accuracy, high rotational speeds, and increased operating efficiency
Specifications for this item
Brand Name FAG Bearings
Part Number 3305-BD-2HRS-TVH
System of Measurement Inch/Metric
Bore Diameter 25  mm
Outside Diameter 62  mm
Overall Width 1  inches
Max Rotational Speed 6700  RPM
Static Load Capacity 4500  pounds
Dynamic Load Capacity 6700  pounds
EAN 4012801009959
Number of Items 1
UNSPSC Code 31171504
FAG 51100 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 10mm ID, 24mm OD, 9mm Width, 9500rpm Maximum Rotational Speed, 3150lbf Static Load Capacity, 2240lbf Dynamic Load Capacity

FAG 51100 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 10mm ID, 24mm OD, 9mm Width, 9500rpm Maximum Rotational Speed, 3150lbf Static Load Capacity, 2240lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction
  • Open bearing for lubrication applied in place
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise
  • Grooved raceways for higher speeds and thrust-bearing capacity than flat washers
Specifications for this item
Brand Name FAG Bearings
Part Number 51100
System of Measurement Metric
Bore Diameter 10  mm
Outside Diameter 24  mm
Overall Width 9  mm
Max Rotational Speed 9500  RPM
Static Load Capacity 3150  pounds
Dynamic Load Capacity 2240  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 104/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801162135
Number of Items 1
UNSPSC Code 31171552
FAG 51113 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 65mm ID, 90mm OD, 18mm Width, 3400rpm Maximum Rotational Speed, 22000lbf Static Load Capacity, 8300lbf Dynamic Load Capacity

FAG 51113 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 65mm ID, 90mm OD, 18mm Width, 3400rpm Maximum Rotational Speed, 22000lbf Static Load Capacity, 8300lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction
  • Open bearing for lubrication applied in place
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise
  • Grooved raceways for higher speeds and thrust-bearing capacity than flat washers
Specifications for this item
Brand Name FAG Bearings
Part Number 51113
System of Measurement Metric
Bore Diameter 65  mm
Outside Diameter 90  mm
Overall Width 18  mm
Max Rotational Speed 3400  RPM
Static Load Capacity 22000  pounds
Dynamic Load Capacity 8300  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 104/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801016636
Number of Items 1
UNSPSC Code 31171552
FAG 51104 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 20mm ID, 35mm OD, 10mm Width, 7000rpm Maximum Rotational Speed, 4750lbf Static Load Capacity, 2850lbf Dynamic Load Capacity

FAG 51104 Grooved Race Thrust Bearing, Single Row, Open, 90° Contact Angle, Steel Cage, Metric, 20mm ID, 35mm OD, 10mm Width, 7000rpm Maximum Rotational Speed, 4750lbf Static Load Capacity, 2850lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Product Features

  • Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction
  • Open bearing for lubrication applied in place
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise
  • Grooved raceways for higher speeds and thrust-bearing capacity than flat washers
Specifications for this item
Brand Name FAG Bearings
Part Number 51104
System of Measurement Metric
Bore Diameter 20  mm
Outside Diameter 35  mm
Overall Width 10  mm
Max Rotational Speed 7000  RPM
Static Load Capacity 4750  pounds
Dynamic Load Capacity 2850  pounds
Specification Met DIN 623-1/DIN ISO 281/EN 10139/ISO 104/ISO 199/ISO 281/ISO 683-17/SAE J403
EAN 4012801016353
National Stock Number 3110-00-761-6577
Number of Items 1
UNSPSC Code 31171552