Bearing NTN Archives - Anugerah Jaya Bearing

Bearing NTN 6201 Bearing 12mm ID x 32mm OD x 10 mm Deep 12x32x10

Bearing, Bearing NTN·November 7, 2014October 1, 2015

Merk: Bearing NTN

Nomor/Jenis Sparepart: 6201

Materi/Bahan: steel

Fitur Produk:

NTN 6201 Bearing

Deskripsi:

NTN 6201 Bearing

Bearing NTN 30206 Tapered Roller Bearing Cone and Cup Set, Single Row, Metric, 30mm ID, 62mm OD, 16mm Width

Bearing NTN·November 7, 2014

Merk: Bearing NTN

Nomor/Jenis Sparepart: KIT12445

Materi/Bahan: steel

Diameter Lubang: 30 mm

Diameter Luar: 62 mm

Lebar Bearing: 16 mm

Kecepatan Rotasi Maksimum: 8700 RPM

Kapasitas Muatan Statis: 4568.328634141 kilograms

Kapasitas Muatan Dinamis: 4231.822283858 kilograms

Fitur Produk:

Single-row tapered roller bearing that supports an axial load and a one-direction radial load
Conical roller geometry permits a static load rating (Cor) of 44.8 kN and a dynamic load rating (Cr) of 41.5 kN
Straight bore accommodates precise shaft size
Chrome steel cage evenly spaces rollers for reduced friction, vibration, and noise
Open bearing for lubrication applied in place

Deskripsi:

This single-row tapered roller bearing supports a combined axial load and one-direction radial load, making it suitable for applications that require moderate speed and durability. Its conical roller geometry permits a static load rating (Cor) of 44.8 kN and a dynamic load rating (Cr) of 41.5 kN. It has a limiting speed of 6,500 rpm with grease lubrication and 8,700 rpm with oil lubrication. The bearing has an inside diameter (ID) of 30 mm, an outside diameter (OD) of 62 mm, and a width of 16 mm. Its chrome steel cage prevents the rollers from coming into contact with each other during use, reducing friction, vibration, and noise, and its unsealed design allows for lubrication in place. Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads. This tapered roller bearing is suitable for use in applications such as agricultural machinery, construction and mining equipment, axle systems, and engine motors.

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.