Bearing Archives - Page 55 of 64 - Anugerah Jaya Bearing

FAG 22316E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 80mm ID, 170mm OD, 58mm Width, 4300rpm Maximum Rotational Speed, 510kN Static Load Capacity, 500kN Dynamic Load Capacity

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Straight bore for fitting to a conventional cylindrical shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Specifications for this item

Brand Name	FAG Bearings
Part Number	22316-E1A-M-C3
Material Type	Brass/Bronze Cage
System of Measurement	Metric
Bore Diameter	80 mm
Outside Diameter	170 mm
Overall Width	58 mm
Max Rotational Speed	4300 RPM

Static Load Capacity	510 Kilonewtons
Dynamic Load Capacity	500 Kilonewtons
Specification Met	DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN	4026677848079
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG 22205E1K-C3 Spherical Roller Bearing, Tapered Bore, Steel Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 18mm Width

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a C3 radial clearance, an outer ring with lubrication groove and three oil holes, and a 1:12 tapered bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s 1:12 taper compensates for flexing shafts and fits tapered shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers	ISO 683-17
System for creating part numbers	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

E1 Series two row spherical roller bearing with oversize rollers and maximum misalignment adjustment for applications that support high radial and oscillating axial loads
Pressed steel cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
P5 precision on rings and hardened inner ring
C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
Bore with 1:12 taper compensates for flexing shafts and fits tapered shafts

Specifications for this item

Brand Name	FAG Bearings
Part Number	22205-E1-K-C3
Material Type	Steel
System of Measurement	Metric
Bore Diameter	25 mm
Outside Diameter	52 mm

Overall Width	18 mm
Specification Met	DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17
EAN	4026677808066
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG 22215E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 75mm ID, 130mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 236kN Static Load Capacity, 216kN Dynamic Load Capacity

Bearing, Bearing FAG·October 16, 2015October 16, 2015

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Straight bore for fitting to a conventional cylindrical shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Specifications for this item

Brand Name	FAG Bearings
Part Number	22215-E1A-M-C3
Material Type	Brass/Bronze Cage
System of Measurement	Metric
Bore Diameter	75 mm
Outside Diameter	130 mm
Overall Width	31 mm
Max Rotational Speed	6300 RPM

Static Load Capacity	236 Kilonewtons
Dynamic Load Capacity	216 Kilonewtons
Specification Met	DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN	4026677847201
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG 23130E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 150mm ID, 250mm OD, 80mm Width, 2600rpm Maximum Rotational Speed, 1320kN Static Load Capacity, 1000kN Dynamic Load Capacity

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Straight bore for fitting to a conventional cylindrical shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Specifications for this item

Brand Name	FAG Bearings
Part Number	23130-E1A-M-C3
Material Type	Brass/Bronze Cage
System of Measurement	Metric
Bore Diameter	150 mm
Outside Diameter	250 mm
Overall Width	80 mm
Max Rotational Speed	2600 RPM

Static Load Capacity	1320 Kilonewtons
Dynamic Load Capacity	1000 Kilonewtons
Specification Met	DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN	4026677832658
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG 22215E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 75mm ID, 130mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 236kN Static Load Capacity, 216kN Dynamic Load Capacity

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Specifications for this item

Brand Name	FAG Bearings
Part Number	22215-E1A-K-M-C3
Material Type	Brass/Bronze Cage
System of Measurement	Metric
Bore Diameter	75 mm
Outside Diameter	130 mm
Overall Width	31 mm
Max Rotational Speed	6300 RPM

Static Load Capacity	236 Kilonewtons
Dynamic Load Capacity	216 Kilonewtons
Specification Met	DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN	4026677847225
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG 22314E1A-M-C3 Spherical Roller Bearing, Straight Bore, Brass Cage, C3 Clearance, Metric, 70mm ID, 150mm OD, 51mm Width, 4500rpm Maximum Rotational Speed, 390kN Static Load Capacity, 390kN Dynamic Load Capacity

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads, provides latitude for self-realignment, and compensates for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The straight bore fits on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Straight bore for fitting to a conventional cylindrical shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Specifications for this item

Brand Name	FAG Bearings
Part Number	22314-E1A-M-C3
Material Type	Brass/Bronze Cage
System of Measurement	Metric
Bore Diameter	70 mm
Outside Diameter	150 mm
Overall Width	51 mm
Max Rotational Speed	4500 RPM

Static Load Capacity	390 Kilonewtons
Dynamic Load Capacity	390 Kilonewtons
Specification Met	DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN	4026677847515
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG 23322AS-MA-T41A Shaker Screen Spherical Roller Bearing, Brass Cage, C4 Clearance, Metric, 110mm ID, 240mm OD, 92.1mm Width, 2600rpm Maximum Rotational Speed

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG shaker screen spherical roller bearing has a brass cage, a C4 radial clearance, P5 precision rings, an outer ring with lubrication groove and three oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in vibrating screens. The one-piece machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This bearing conforms to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation and its C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor. This roller bearing’s straight bore fits conventional cylindrical shafts. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This shaker screen spherical roller bearing is suitable for use in aggregate industry applications such as vibrating screens, jaw crushers, impactors, cone crushers, and conveyors.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers	ISO 683-17
System for creating part numbers	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Product Features

Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads
One-piece solid brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
P5 precision both rings, guide on outer ring, and center lubrication groove and oil holes in outer ring
C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor
Straight bore fits conventional cylindrical shafts

Specifications for this item

Brand Name	FAG Bearings
Part Number	23322-AS-MA-T41A
System of Measurement	Metric
Bore Diameter	110 mm
Outside Diameter	240 mm
Overall Width	92.1 mm

Max Rotational Speed	2600 RPM
Specification Met	DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17
EAN	4012801298810
Number of Items	1
UNSPSC Code	31171505

FAG 22205E1-C3 Spherical Roller Bearing, Straight Bore, Steel Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 18mm Width

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG E1 Series spherical roller bearing has a steel cage, a C3 radial clearance, an outer ring with lubrication groove and 3 oil holes, and a straight bore suitable for applications that support high radial and oscillating axial loads, such as in a wind turbine. Its rollers, cage, and rings conform to Deutsches Institut für Normung (DIN) P5 precision standard for performance within a narrow range of variation. The inner ring is hardened and the pressed steel cage has high wear resistance and spaces the oversize rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Its C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor. The bearing’s straight bore fits conventional cylindrical shafts. This bearing has two rows of symmetrically arranged rollers oriented on a concave raceway, which allow self-realignment and compensate for static and dynamic alignment errors. The bearing has a maximum operating temperature of 392 degrees F. This roller bearing is intended for interchangeability and meets DIN standards for parts numbering, bearing dimensions, load ratings, tolerances, and clearances. It meets International Standards Organization (ISO) standards for hardening of bearing rollers and rings. This spherical roller bearing is suitable for use in material handling equipment, electric generators, and machine tools.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, (ISO 492) tolerance class PN
Steel composition for inner and outer rings and rollers	ISO 683-17
System for creating part numbers	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Technical Details

Part Number	22205-E1-C3
Item Weight	5.6 ounces
Product Dimensions	2.3 x 2.2 x 0.8 inches
Origin	USA
Item Package Quantity	1
Cutting Diameter	52 millimeters
Measurement System	Metric
Certification	DIN 623-1/DIN ISO 281/ISO 281/ISO 492/ISO 683-17

FAG 22222E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 110mm ID, 200mm OD, 53mm Width, 4000rpm Maximum Rotational Speed, 600kN Static Load Capacity, 550kN Dynamic Load Capacity

Bearing, Bearing FAG·October 16, 2015

Product Description

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Product Features

Double row spherical roller bearing for applications that support radial and oscillating axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Specifications for this item

Brand Name	FAG Bearings
Part Number	22222-E1A-K-M-C3
Material Type	Brass/Bronze Cage
System of Measurement	Metric
Bore Diameter	110 mm
Outside Diameter	200 mm
Overall Width	53 mm
Max Rotational Speed	4000 RPM

Static Load Capacity	600 Kilonewtons
Dynamic Load Capacity	550 Kilonewtons
Specification Met	DIN 620-4/DIN 623-1/DIN ISO 281/ISO 281/ISO 683-17
EAN	4026677850614
Manufacturer Series Number	E1 Series
Number of Items	1
UNSPSC Code	31171505

FAG NU2308E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, Normal Clearance, 40mm ID, 90mm OD, 33mm Width

Bearing, Bearing FAG·October 15, 2015

Product Features

FAG cylindrical roller bearing with polyamide cage and removable inner ring suitable for high radial loads
CN (normal) radial clearance for applications where thermal expansion is not a factor
Single row roller bearing for high radial loads with low friction
Removable inner ring in open bearing allows for lubrication in place
Metric unit measurements for industry consistency

Specifications for this item

Brand Name	FAG Bearings
Part Number	NU2308-E-TVP2
System of Measurement	Metric
Bore Diameter	40 mm
Outside Diameter	90 mm
Overall Width	33 mm

Max Rotational Speed	7500 RPM
EAN	4012801234245
Item Weight	3 pounds
Number of Items	1
UNSPSC Code	31171547