Merk: Bearing NTN
Nomor/Jenis Sparepart: 6201
Materi/Bahan: steel
Fitur Produk:
- NTN 6201 Bearing
Deskripsi:
NTN 6201 Bearing
Distributor Bearing Terbaik dan Terpercaya – ASB, NTN, Koyo, FAG, Roller Chain
Merk: Bearing NTN
Nomor/Jenis Sparepart: 6201
Materi/Bahan: steel
Fitur Produk:
Deskripsi:
NTN 6201 Bearing
Merk: Bearing FAG
Nomor/Jenis Sparepart: 6332-M-C3
Materi/Bahan: steel
Diameter Lubang: 160 mm
Diameter Luar: 340 mm
Lebar Bearing: 68 mm
Kecepatan Rotasi Maksimum: 4300 RPM
Kapasitas Muatan Statis: 32658.651 kilograms
Kapasitas Muatan Dinamis: 30390.689 kilograms
Fitur Produk:
Deskripsi:
The FAG single-row, open radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It conforms to the precision standard Annular Bearing Engineers Committee (ABEC) 1 for performance within a narrow range of variation, and it has a C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. Its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others.
Main bearing dimensions | DIN 715 |
Basic dynamic load ratings | DIN ISO 281 |
Dimensional and geometric tolerances | DIN 620-3 (ISO 199), tolerance class PN |
Through-hardening steel for inner and outer rings and rollers | ISO 683-17 |
Steel strip for cage | EN 10139, SAE J403 |
Load carrying capacity and life | DIN ISO 281 Appendix 1 |
System for creating part numbers for rolling bearings | DIN 623-1 |
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: 6228-C3
Materi/Bahan: steel
Diameter Lubang: 140 mm
Diameter Luar: 250 mm
Lebar Bearing: 42 mm
Kecepatan Rotasi Maksimum: 6000 RPM
Kapasitas Muatan Statis: 17009.714 kilograms
Kapasitas Muatan Dinamis: 18143.695 kilograms
Fitur Produk:
Deskripsi:
The FAG radial bearing is an open single-row bearing with metric dimensions for supporting radial loads. This single-row bearing conforms to the Annular Bearing Engineers Committee (ABEC) 1 precision standard for performance within a narrow range of variation and has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. The steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. The bearing has an open configuration for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants. This FAG radial ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: 1213K
Materi/Bahan: steel
Berat Barang: 1.36078 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 1213K FAG New Self Aligning Ball Bearing
Merk: Bearing FAG
Nomor/Jenis Sparepart: 1211-K-TVH-C3
Materi/Bahan: steel
Diameter Lubang: 55 mm
Diameter Luar: 100 mm
Lebar Bearing: 21 mm
Kecepatan Rotasi Maksimum: 7500 RPM
Kapasitas Muatan Statis: 1016.047 kilograms
Kapasitas Muatan Dinamis: 2721.554 kilograms
Fitur Produk:
Deskripsi:
This FAG double-row self-aligning ball bearing is an open bearing, and has a tapered bore, polyamide/nylon cage, and C3 clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a tapered bore with a standard 1:12 taper to compensate for shaft deflection or to mount on a tapered shaft using an interference fit. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has an injection-molded snap-type cage made of glass fiber reinforced polyamide 66 to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This cage type can be used at operating temperatures up to 120 degrees C (250 degrees F). The bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. Additionally, this bearing is produced to PN (normal) tolerances in accordance with Deutsches Institut für Normung (DIN) 620-2 standards for quality assurance. This self-aligning ball bearing is for use in commercial and industrial applications including film processing equipment, office automation, vertical spinning equipment, and industrial countershafts, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: 22311-E1A-MA-T41A
Materi/Bahan: brass
Diameter Lubang: 55 mm
Diameter Luar: 120 mm
Lebar Bearing: 43 mm
Kecepatan Rotasi Maksimum: 5600 RPM
Kapasitas Muatan Statis: 260 Kilonewtons
Kapasitas Muatan Dinamis: 265 Kilonewtons
Fitur Produk:
Deskripsi:
This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. This bearing has a C4 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than both CN (normal) and C3 (extra) clearances. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. In addition to compensating for misalignment, the two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, especially those with restricted diameter tolerances, as with an oscillating shaker conveyor. The design of this spherical roller bearing is rated “Medium,” making it applicable for use in a range of oscillating applications, and it has a larger roller set than standard rollers for additional durability. It can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is straight to fit on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The solid brass cage, whose guidance structures are located within the outer ring, prevents the rollers from coming into contact with each other during use, reducing friction, vibration, and noise, and the outer ring has a center groove with three holes spaced evenly around it for adding lubricants. The E1 designation in the part number identifies this bearing as having been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in such applications as jaw crushers, impactors, cone crushers, and conveyors, among others.
Main bearing dimensions | DIN 635-2 |
Basic dynamic load ratings | DIN ISO 281 |
Dimensional and geometric tolerances | DIN 620-2, tolerance class PN |
Radial internal clearance | Internal clearance group CN, DIN 620-4 (ISO 5 753) |
Through-hardening steel for inner and outer rings and rollers | ISO 683-17 |
System for creating part numbers for rolling bearings | DIN 623-1 |
Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: 2210-2RS-TVH
Materi/Bahan: steel
Diameter Lubang: 50 mm
Diameter Luar: 90 mm
Lebar Bearing: 23 mm
Kecepatan Rotasi Maksimum: 5300 RPM
Kapasitas Muatan Statis: 830.074 kilograms
Kapasitas Muatan Dinamis: 2313.321 kilograms
Fitur Produk:
Deskripsi:
This FAG double-row self-aligning ball bearing is double-sealed, and has a cylindrical bore, polyamide/nylon cage, and normal clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a straight bore for fitting on a conventional cylindrical shaft. Contact seals on both sides of the bearing keep out contaminants such as dirt and grime and hold in lubricant applied at manufacturing that lasts the lifetime of the bearing. This bearing has an injection-molded snap-type cage made of glass fiber reinforced polyamide 66 to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This cage type can be used at operating temperatures up to 120 degrees C (250 degrees F). The bearing has a normal radial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. Additionally, this bearing is produced to PN (normal) tolerances in accordance with Deutsches Institut für Normung (DIN) 620-2 standards for quality assurance. This self-aligning ball bearing is for use in commercial and industrial applications including film processing equipment, office automation, vertical spinning equipment, and industrial countershafts, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: NU206-E-TVP2
Materi/Bahan: steel
Diameter Lubang: 30 mm
Diameter Luar: 62 mm
Lebar Bearing: 16 mm
Kecepatan Rotasi Maksimum: 12000 RPM
Kapasitas Muatan Statis: 3764.817 kilograms
Kapasitas Muatan Dinamis: 3991.613 kilograms
Fitur Produk:
Deskripsi:
This FAG cylindrical roller bearing with a polyamide cage and removable inner ring is suitable for applications that support high radial loads. This roller bearing has a CN (normal) radial clearance for applications and operating conditions with normal shaft and housing tolerances where thermal expansion is not a factor. This is a single row roller bearing that supports high radial loads with low friction. A removable inner ring in the open bearing allows application of lubrication. This roller bearing is measured in metric units for industry cross-matching and parts consistency.
Cylindrical roller bearings are used in applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.
Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Rolling bearings can be open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: 7206-B-TVP-UO
Materi/Bahan: steel
Diameter Lubang: 30 mm
Diameter Luar: 62 mm
Lebar Bearing: 16 mm
Kecepatan Rotasi Maksimum: 13000 RPM
Kapasitas Muatan Statis: 1428.816 kilograms
Kapasitas Muatan Dinamis: 2063.845 kilograms
Fitur Produk:
Deskripsi:
The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
Main bearing dimensions | DIN 715 |
Basic dynamic load ratings | DIN ISO 281 |
Dimensional and geometric tolerances | DIN 620-3 (ISO 199), tolerance class PN |
Through-hardening steel for inner and outer rings and rollers | ISO 683-17 |
Steel strip for cage | EN 10139, SAE J403 |
Load carrying capacity and life | DIN ISO 281 Appendix 1 |
System for creating part numbers for rolling bearings | DIN 623-1 |
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.
Merk: Bearing NTN
Nomor/Jenis Sparepart: KIT12445
Materi/Bahan: steel
Diameter Lubang: 30 mm
Diameter Luar: 62 mm
Lebar Bearing: 16 mm
Kecepatan Rotasi Maksimum: 8700 RPM
Kapasitas Muatan Statis: 4568.328634141 kilograms
Kapasitas Muatan Dinamis: 4231.822283858 kilograms
Fitur Produk:
Deskripsi:
This single-row tapered roller bearing supports a combined axial load and one-direction radial load, making it suitable for applications that require moderate speed and durability. Its conical roller geometry permits a static load rating (Cor) of 44.8 kN and a dynamic load rating (Cr) of 41.5 kN. It has a limiting speed of 6,500 rpm with grease lubrication and 8,700 rpm with oil lubrication. The bearing has an inside diameter (ID) of 30 mm, an outside diameter (OD) of 62 mm, and a width of 16 mm. Its chrome steel cage prevents the rollers from coming into contact with each other during use, reducing friction, vibration, and noise, and its unsealed design allows for lubrication in place. Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads. This tapered roller bearing is suitable for use in applications such as agricultural machinery, construction and mining equipment, axle systems, and engine motors.
Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.