Blog - Page 72 of 86 - Anugerah Jaya Bearing

Bearing FAG NU1006 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Standard Capacity, Brass Cage, Normal Clearance, 30mm ID, 55mm OD, 13mm Width

Bearing FAG·November 7, 2014

Merk: Bearing FAG

Nomor/Jenis Sparepart: NU1006

Materi/Bahan: steel

Diameter Lubang: 30 mm

Diameter Luar: 55 mm

Lebar Bearing: 13 mm

Kecepatan Rotasi Maksimum: 24000 RPM

Berat Barang: 0.136078 kilograms

Fitur Produk:

FAG cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads
CN (normal) radial clearance for applications where thermal expansion is not a factor
Single row roller bearing for high radial loads with low friction
Removable inner ring in open bearing allows for lubrication in place
Metric unit measurements for industry consistency

Deskripsi:

This FAG cylindrical roller bearing with a brass cage and removable inner ring is suitable for applications that support high radial loads. This roller bearing has a CN (normal) radial clearance for applications and operating conditions with normal shaft and housing tolerances where thermal expansion is not a factor. This is a single row roller bearing that supports high radial loads with low friction. A removable inner ring in the open bearing allows application of lubrication. This roller bearing is measured in metric units for industry cross-matching and parts consistency.

Cylindrical roller bearings are used in applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Rolling bearings can be open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Pillow Block UCP208-24 Mounted Bearing, 2 Bolt, 1-1/2″ Inside Diameter, Set screw Lock, Cast Iron, Inch

Pillow Block·November 7, 2014

Merk: Pillow block Cina

Nomor/Jenis Sparepart: Kit11944

Materi/Bahan: steel

Diameter Luar: 1-1/2 inches

Fitur Produk:

Cast iron P208 one-piece pillow block housing increases life of the bearing
UC208-24 chrome steel bearing for efficient operations at a wide range of speeds
Dynamic (radial) load rating of 29.1 kN and static (axial) load rating of 17.8 kN
Set screw prevents shaft slippage
1-1/2″ inside diameter fits conventional cylindrical shafts

Deskripsi:

The UCP208-24 pillow block mounted bearing with a 1-1/2″ inside diameter and two bolt holes is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has a cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 29.1 kN and a static (axial) load rating of 17.8 kN. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 1/2″ bolts (sold separately). This mounted bearing is used in industrial manufacturing, food and beverage manufacturing, and in the textile industry.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.