Merk: Bearing NTN
Nomor/Jenis Sparepart: 6905
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
- Single Row Ball Bearing
Deskripsi:
New in Factory box – 6905 NTN New Single Row Ball Bearing
Distributor Bearing Terbaik dan Terpercaya – ASB, NTN, Koyo, FAG, Roller Chain
Merk: Bearing NTN
Nomor/Jenis Sparepart: 6905
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 6905 NTN New Single Row Ball Bearing
Merk: Bearing FAG
Nomor/Jenis Sparepart: 6306
Materi/Bahan: steel
Diameter Lubang: 30 mm
Diameter Luar: 72 mm
Lebar Bearing: 19 mm
Kecepatan Rotasi Maksimum: 24000 RPM
Kapasitas Muatan Statis: 1655.612 kilograms
Kapasitas Muatan Dinamis: 2971.03 kilograms
Fitur Produk:
Deskripsi:
The FAG single-row, open radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It conforms to the precision standard Annular Bearing Engineers Committee (ABEC) 1 for performance within a narrow range of variation, and it has a CN (normal) radial internal clearance for applications that do not involve thermal expansion. Its steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others.
Main bearing dimensions | DIN 715 |
Basic dynamic load ratings | DIN ISO 281 |
Dimensional and geometric tolerances | DIN 620-3 (ISO 199), tolerance class PN |
Through-hardening steel for inner and outer rings and rollers | ISO 683-17 |
Steel strip for cage | EN 10139, SAE J403 |
Load carrying capacity and life | DIN ISO 281 Appendix 1 |
System for creating part numbers for rolling bearings | DIN 623-1 |
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.
Merk: Bearing FAG
Nomor/Jenis Sparepart: 6206-2RSR-L038-C3
Materi/Bahan: steel
Diameter Lubang: 30 mm
Diameter Luar: 62 mm
Lebar Bearing: 16 mm
Kecepatan Rotasi Maksimum: 13000 RPM
Kapasitas Muatan Statis: 1986.735 kilograms
Kapasitas Muatan Dinamis: 1143.053 kilograms
Fitur Produk:
Deskripsi:
This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Light,” making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.
Main bearing dimensions | DIN 625-1 |
Basic dynamic load ratings | DIN ISO 281 |
C3 radial internal clearance | DIN 620-4 (ISO 5 753) |
Shaft and housing tolerances | ISO 286 |
Through-hardening steel for inner and outer rings | ISO 683-17 |
Steel strip for cage | EN 10139, SAE J403 |
Load carrying capacity and life | DIN ISO 281 Appendix 1 |
System for creating part numbers for rolling bearings | DIN 623-1 |
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 6205
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 6205 KOYO New Single Row Ball Bearing
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 6204RS
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 6204RS KOYO New Single Row Ball Bearing
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 6206ZZC3
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 6206ZZC3 KOYO New Single Row Ball Bearing
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 6306-32-2RSC4
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
Deskripsi: New in Factory box – 6306-32-2RSC4 KOYO New Single Row Ball Bearing
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 6305
Materi/Bahan: steel
Berat Barang: 0.453592 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 6305 KOYO New Single Row Ball Bearing
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 6210
Materi/Bahan: steel
Berat Barang: 0.907185 kilograms
Fitur Produk:
Deskripsi:
New in Factory box – 6210 KOYO New Single Row Ball Bearing
Merk: Bearing Koyo
Nomor/Jenis Sparepart: 1211KC3
Materi/Bahan: steel
Deskripsi:
New in Factory box – 1211KC3 KOYO New Self Aligning Ball Bearing