Bearing FAG

FAG, 7216B.MP.UA, Angular Contact Bearing, 80mm x 140mm x 26mm, USA, /FE2/

FAG, 7216B.MP.UA, Angular Contact Bearing, 80mm x 140mm x 26mm, USA, /FE2/

Bearing, Bearing FAG·

FAG

Angular Contact Bearing

Mfr. Number: 7216B.MP.UA
Type of Bearing: Angular Contact
Type of Bore: Straight
Bore Diameter: 80mm
Outside Diameter: 140mm
Width: 26mm
Contact Angle: 40 Degrees
Closure Type: Open
Bearing Combination: Single Row
Cage Material: Machined Brass
Internal Clearance: Normal Fit
Type of Preload: Small Clearance

Made in USA

FAG Bearing 22313ES 22313ES.TVPB

FAG Bearing 22313ES 22313ES.TVPB

Bearing, Bearing FAG·

Description
– Model : 22313ES.TVPB
– Catalog Number : 22313ES
– Manufacturer : FAG
– Inside Diameter : 65 mm
– Outside Diameter : 140 mm
– Width : 48 mm
– Brand new from surplus.
– Made in USA

#8300 ( JK )

 

Bearing FAG 22220E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 100mm ID, 180mm OD, 46mm Width, 4300rpm Maximum Rotational Speed, 475kN Static Load Capacity, 430kN Dynamic Load Capacity

Bearing FAG 22220E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 100mm ID, 180mm OD, 46mm Width, 4300rpm Maximum Rotational Speed, 475kN Static Load Capacity, 430kN Dynamic Load Capacity

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 22220-E1A-K-M-C3

Materi/Bahan: Brass/Bronze Cage

Diameter Lubang: 100  mm

Diameter Luar: 180  mm

Lebar Bearing: 46  mm

Kecepatan Rotasi Maksimum: 4300  RPM

Kapasitas Muatan Statis: 475  Kilonewtons

Kapasitas Muatan Dinamis: 430  Kilonewtons

Berat Barang: 4.758184 kilograms

Fitur Produk:

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Deskripsi:

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. The bearing’s two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, including those with restricted diameter tolerances (as with an oscillating shaker conveyor). This bearing is rated “Light,” making it applicable for use for average loads or where space is tight, it has a larger roller set than standard rollers for additional durability, and it can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is tapered with a standard 1:12 taper, giving the bearing the ability to compensate for a flexing shaft, or to fit on a tapered shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The roller-guided solid brass cage prevents the barrel rollers from coming into contact with each other during use, reducing friction, vibration, and noise. The outer ring has a center groove with three holes spaced evenly around it for adding lubricants. Bearings in the E1 series have been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in various applications such as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions DIN 635-2
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-2, tolerance class PN
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers ISO 683-17
System for creating part numbers for rolling bearings DIN 623-1

 

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Bearing FAG 6206-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 30mm ID, 62mm OD, 16mm Width, 14000rpm Maximum Rotational Speed, 2520lbf Static Load Capacity, 4380lbf Dynamic Load Capacity

Bearing FAG 6206-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 30mm ID, 62mm OD, 16mm Width, 14000rpm Maximum Rotational Speed, 2520lbf Static Load Capacity, 4380lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6206-C3

Materi/Bahan: Steel

Diameter Lubang: 30  mm

Diameter Luar: 62  mm

Lebar Bearing: 16  mm

Kecepatan Rotasi Maksimum: 13000  RPM

Kapasitas Muatan Statis: 1986.735 kilograms

Kapasitas Muatan Dinamis: 1143.053 kilograms

Fitur Produk:

  • Deep groove geometry for high speeds and supporting both radial and axial loads
  • “Light” bearing design for use in limited space applications or for average loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Open bearing for lubrication applied in place

Deskripsi:

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Light,” making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The open design allows for lubricating the bearing in place. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.