Bearing FAG

Merk: Bearing FAG

Nomor/Jenis Sparepart: 22311-E1A-MA-T41A

Materi/Bahan: brass

Diameter Lubang: 55  mm

Diameter Luar: 120  mm

Lebar Bearing: 43  mm

Kecepatan Rotasi Maksimum: 5600  RPM

Kapasitas Muatan Statis: 260  Kilonewtons

Kapasitas Muatan Dinamis: 265  Kilonewtons

Fitur Produk:

• Double row spherical roller bearing for applications that support radial and oscillating axial loads
• C4 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F
• Straight bore for fitting to a conventional cylindrical shaft
• Outer ring-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise
• Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place

Deskripsi:

This FAG double row spherical roller bearing with a brass cage is suitable for applications that support radial and oscillating axial loads. This bearing has a C4 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than both CN (normal) and C3 (extra) clearances. This clearance allows for thermal expansion as the bearing supports radial loads as well as providing latitude for self-realignment and compensating for static and dynamic alignment errors. In addition to compensating for misalignment, the two rows of symmetrically arranged barrel rollers, which are oriented on a concave raceway, are designed to support axial loads in either direction, especially those with restricted diameter tolerances, as with an oscillating shaker conveyor. The design of this spherical roller bearing is rated “Medium,” making it applicable for use in a range of oscillating applications, and it has a larger roller set than standard rollers for additional durability. It can be used to a maximum operating temperature of 200 degrees C/392 degrees F. The bore is straight to fit on a conventional cylindrical shaft. The inner and outer rings and barrel rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The solid brass cage, whose guidance structures are located within the outer ring, prevents the rollers from coming into contact with each other during use, reducing friction, vibration, and noise, and the outer ring has a center groove with three holes spaced evenly around it for adding lubricants. The E1 designation in the part number identifies this bearing as having been manufactured under FAG’s improved engineering processes, resulting in a rating life that is more than double that of the same bearing from the E series. This spherical roller bearing is for use in such applications as jaw crushers, impactors, cone crushers, and conveyors, among others.

Specifications

Main bearing dimensions	DIN 635-2
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-2, tolerance class PN
Radial internal clearance	Internal clearance group CN, DIN 620-4 (ISO 5 753)
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
System for creating part numbers for rolling bearings	DIN 623-1

 

Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: 2210-2RS-TVH

Materi/Bahan: steel

Diameter Lubang: 50  mm

Diameter Luar: 90  mm

Lebar Bearing: 23  mm

Kecepatan Rotasi Maksimum: 5300  RPM

Kapasitas Muatan Statis: 830.074 kilograms

Kapasitas Muatan Dinamis: 2313.321 kilograms

Fitur Produk:

• Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
• Straight bore for fitting on a conventional cylindrical shaft
• Contact seals on both sides of the bearing keeps lubricant in and contaminants out
• Glass fiber reinforced polyamide 66 plastic cage evenly spaces balls for reduced friction, vibration, and noise
• Normal radial internal clearance for applications where thermal expansion is not a factor

Deskripsi:

This FAG double-row self-aligning ball bearing is double-sealed, and has a cylindrical bore, polyamide/nylon cage, and normal clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a straight bore for fitting on a conventional cylindrical shaft. Contact seals on both sides of the bearing keep out contaminants such as dirt and grime and hold in lubricant applied at manufacturing that lasts the lifetime of the bearing. This bearing has an injection-molded snap-type cage made of glass fiber reinforced polyamide 66 to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This cage type can be used at operating temperatures up to 120 degrees C (250 degrees F). The bearing has a normal radial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. Additionally, this bearing is produced to PN (normal) tolerances in accordance with Deutsches Institut für Normung (DIN) 620-2 standards for quality assurance. This self-aligning ball bearing is for use in commercial and industrial applications including film processing equipment, office automation, vertical spinning equipment, and industrial countershafts, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

 

Merk: Bearing FAG

Nomor/Jenis Sparepart: NU206-E-TVP2

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 62  mm

Lebar Bearing: 16  mm

Kecepatan Rotasi Maksimum: 12000  RPM

Kapasitas Muatan Statis: 3764.817 kilograms

Kapasitas Muatan Dinamis: 3991.613 kilograms

Fitur Produk:

• FAG cylindrical roller bearing with polyamide cage and removable inner ring suitable for high radial loads
• CN (normal) radial clearance for applications where thermal expansion is not a factor
• Single row roller bearing for high radial loads with low friction
• Removable inner ring in open bearing allows for lubrication in place
• Metric unit measurements for industry consistency

Deskripsi:

This FAG cylindrical roller bearing with a polyamide cage and removable inner ring is suitable for applications that support high radial loads. This roller bearing has a CN (normal) radial clearance for applications and operating conditions with normal shaft and housing tolerances where thermal expansion is not a factor. This is a single row roller bearing that supports high radial loads with low friction. A removable inner ring in the open bearing allows application of lubrication. This roller bearing is measured in metric units for industry cross-matching and parts consistency.

Cylindrical roller bearings are used in applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Rolling bearings can be open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: 7206-B-TVP-UO

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 62  mm

Lebar Bearing: 16  mm

Kecepatan Rotasi Maksimum: 13000  RPM

Kapasitas Muatan Statis: 1428.816 kilograms

Kapasitas Muatan Dinamis: 2063.845 kilograms

Fitur Produk:

Deskripsi:

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications

Main bearing dimensions	DIN 715
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
Steel strip for cage	EN 10139, SAE J403
Load carrying capacity and life	DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings	DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: NU1006

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 55  mm

Lebar Bearing: 13  mm

Kecepatan Rotasi Maksimum: 24000  RPM

Berat Barang: 0.136078 kilograms

Fitur Produk:

• FAG cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads
• CN (normal) radial clearance for applications where thermal expansion is not a factor
• Single row roller bearing for high radial loads with low friction
• Removable inner ring in open bearing allows for lubrication in place
• Metric unit measurements for industry consistency

Deskripsi:

This FAG cylindrical roller bearing with a brass cage and removable inner ring is suitable for applications that support high radial loads. This roller bearing has a CN (normal) radial clearance for applications and operating conditions with normal shaft and housing tolerances where thermal expansion is not a factor. This is a single row roller bearing that supports high radial loads with low friction. A removable inner ring in the open bearing allows application of lubrication. This roller bearing is measured in metric units for industry cross-matching and parts consistency.

Cylindrical roller bearings are used in applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Rolling bearings can be open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6205-2RSR-L038-C3

Materi/Bahan: steel

Diameter Lubang: 25  mm

Diameter Luar: 52  mm

Lebar Bearing: 15  mm

Kecepatan Rotasi Maksimum: 15000  RPM

Kapasitas Muatan Statis: 1428.816 kilograms

Kapasitas Muatan Dinamis: 793.7866 kilograms

Fitur Produk:

• Deep groove geometry for high speeds and supporting both radial and axial loads
• “Light” bearing design for use in limited space applications or for average loads
• C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
• Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
• Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Deskripsi:

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Light,” making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions	DIN 625-1
Basic dynamic load ratings	DIN ISO 281
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Shaft and housing tolerances	ISO 286
Through-hardening steel for inner and outer rings	ISO 683-17
Steel strip for cage	EN 10139, SAE J403
Load carrying capacity and life	DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings	DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6306-2Z-L038-C3

Materi/Bahan: Steel

Diameter Lubang: 30  mm

Diameter Luar: 72  mm

Lebar Bearing: 19  mm

Kecepatan Rotasi Maksimum: 9500  RPM

Kapasitas Muatan Statis: 2971.03 kilograms

Kapasitas Muatan Dinamis: 1655.612 kilograms

Fitur Produk:

• Deep groove geometry for high speeds and supporting both radial and axial loads
• “Medium” bearing design for average to above average radial loads and light to average axial loads
• C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
• Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
• Metal shields on both sides of the bearing keep the lubricant in and contaminants out

Deskripsi:

This FAG Medium 6300 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and the balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Medium,” making it applicable for use with average to above average radial loads and light to average axial loads. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a metal shield on either side that fastens to the outside ring and extends over the rolling elements. The shields help keep out contaminants such as dirt and grime and also help to hold in lubricant applied during manufacturing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions	DIN 625-1
Basic dynamic load ratings	DIN ISO 281
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Shaft and housing tolerances	ISO 286
Through-hardening steel for inner and outer rings	ISO 683-17
Steel strip for cage	EN 10139, SAE J403
Load carrying capacity and life	DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings	DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6206-2RSR-L038-C3

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 62  mm

Lebar Bearing: 16  mm

Kecepatan Rotasi Maksimum: 13000  RPM

Kapasitas Muatan Statis: 1986.735 kilograms

Kapasitas Muatan Dinamis: 1143.053 kilograms

Fitur Produk:

• Deep groove geometry for high speeds and supporting both radial and axial loads
• “Light” bearing design for use in limited space applications or for average loads
• C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
• Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
• Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Deskripsi:

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Light,” making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions	DIN 625-1
Basic dynamic load ratings	DIN ISO 281
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Shaft and housing tolerances	ISO 286
Through-hardening steel for inner and outer rings	ISO 683-17
Steel strip for cage	EN 10139, SAE J403
Load carrying capacity and life	DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings	DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6306

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 72  mm

Lebar Bearing:  19  mm

Kecepatan Rotasi Maksimum: 24000  RPM

Kapasitas Muatan Statis: 1655.612 kilograms

Kapasitas Muatan Dinamis: 2971.03 kilograms

Fitur Produk:

• Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
• Conforms to ABEC 1 precision standard for performance within a narrow range of variation
• CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
• Steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
• Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Deskripsi:

The FAG single-row, open radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It conforms to the precision standard Annular Bearing Engineers Committee (ABEC) 1 for performance within a narrow range of variation, and it has a CN (normal) radial internal clearance for applications that do not involve thermal expansion. Its steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others.

Specifications

Main bearing dimensions	DIN 715
Basic dynamic load ratings	DIN ISO 281
Dimensional and geometric tolerances	DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers	ISO 683-17
Steel strip for cage	EN 10139, SAE J403
Load carrying capacity and life	DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings	DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Merk: Bearing FAG

Nomor/Jenis Sparepart:  6206-2RSR-L038-C3

Materi/Bahan: steel

Diameter Lubang: 30  mm

Diameter Luar: 62  mm

Lebar Bearing: 16  mm

Kecepatan Rotasi Maksimum: 13000  RPM

Kapasitas Muatan Statis: 1986.735 kilograms

Kapasitas Muatan Dinamis: 1143.053 kilograms

Fitur Produk:

• Deep groove geometry for high speeds and supporting both radial and axial loads
• “Light” bearing design for use in limited space applications or for average loads
• C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
• Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
• Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Deskripsi:

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Light,” making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions	DIN 625-1
Basic dynamic load ratings	DIN ISO 281
C3 radial internal clearance	DIN 620-4 (ISO 5 753)
Shaft and housing tolerances	ISO 286
Through-hardening steel for inner and outer rings	ISO 683-17
Steel strip for cage	EN 10139, SAE J403
Load carrying capacity and life	DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings	DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.