Bearing FAG

Bearing Fag 6208 2RS Single Row Ball Bearing

Bearing Fag 6208 2RS Single Row Ball Bearing

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6208 2RS

Materi/Bahan: steel

Berat Barang: 0.453592 kilograms

Fitur Produk:

  • Single Row Ball Bearing

Deskripsi:

New in Factory box – 6208 2RS New FAG Single Row Ball Bearing

Bearing FAG 6303-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 47mm OD, 14mm Width, 11000 rpm Maximum Rotational Speed, 1460 lbf Static Load Capacity, 3050 lbf Dynamic Load Capacity

Bearing FAG 6303-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 47mm OD, 14mm Width, 11000 rpm Maximum Rotational Speed, 1460 lbf Static Load Capacity, 3050 lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart:  6303-2RSR-L038-C3

Materi/Bahan: steel

Diameter Lubang: 17  mm

Diameter Luar: 47  mm

Lebar Bearing: 14  mm

Kecepatan Rotasi Maksimum: 11000  RPM

Kapasitas Muatan Statis: 1383.457 kilograms

Kapasitas Muatan Dinamis: 662.2449 kilograms

Fitur Produk:

  • Deep groove geometry for high speeds and supporting both radial and axial loads
  • “Medium” bearing design for average to above average radial loads and light to average axial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Deskripsi:

This FAG Medium 6300 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and the balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated “Medium,” making it applicable for use with average to above average radial loads and light to average axial loads. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that fastens to the outside ring, extends over the rolling elements, and makes contact with the inside ring to keep out contaminants such as dirt and grime. The seals also hold in a lubricant applied during manufacturing that lasts the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Bearing FAG 6305 Radial Bearing, Single Row, ABEC 1 Precision, Open, Steel Cage, Normal Clearance, Metric, 25mm ID, 62mm OD, 17mm Width, 28000rpm Maximum Rotational Speed, 2600lbf Static Load Capacity, 5000lbf Dynamic Load Capacity

Bearing FAG 6305 Radial Bearing, Single Row, ABEC 1 Precision, Open, Steel Cage, Normal Clearance, Metric, 25mm ID, 62mm OD, 17mm Width, 28000rpm Maximum Rotational Speed, 2600lbf Static Load Capacity, 5000lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6305

Materi/Bahan: steel

Diameter Lubang: 25  mm

Diameter Luar: 62  mm

Lebar Bearing: 17  mm

Kecepatan Rotasi Maksimum: 28000  RPM

Kapasitas Muatan Statis: 1179.34 kilograms

Kapasitas Muatan Dinamis: 2267.962

Fitur Produk:

  • Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
  • Conforms to ABEC 1 precision standard for performance within a narrow range of variation
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Deskripsi:

The FAG single-row, open radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It conforms to the precision standard Annular Bearing Engineers Committee (ABEC) 1 for performance within a narrow range of variation, and it has a CN (normal) radial internal clearance for applications that do not involve thermal expansion. Its steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Bearing FAG 6304-C4 Radial Bearing, Single Row, ABEC 1 Precision, Open, Steel Cage, C4 Clearance, Metric, 20mm ID, 52mm OD, 15mm Width, 34000rpm Maximum Rotational Speed, 1760lbf Static Load Capacity, 3600lbf Dynamic Load Capacity

Bearing FAG 6304-C4 Radial Bearing, Single Row, ABEC 1 Precision, Open, Steel Cage, C4 Clearance, Metric, 20mm ID, 52mm OD, 15mm Width, 34000rpm Maximum Rotational Speed, 1760lbf Static Load Capacity, 3600lbf Dynamic Load Capacity

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6304-C4

Materi/Bahan: steel

Diameter Lubang: 20  mm

Diameter Luar: 52  mm

Lebar Bearing: 15  mm

Kecepatan Rotasi Maksimum: 34000  RPM

Kapasitas Muatan Statis: 798.3226 kilograms

Kapasitas Muatan Dinamis: 1632.933 kilograms

Fitur Produk:

  • Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
  • Conforms to ABEC 1 precision standard for performance within a narrow range of variation
  • C4 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) and C3 to compensate for thermal expansion
  • Steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Deskripsi:

The FAG single-row, open radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It conforms to the precision standard Annular Bearing Engineers Committee (ABEC) 1 for performance within a narrow range of variation, and it has a C4 radial internal clearance for radial slack between the inner and outer rings that is greater than C3 to compensate for thermal expansion. Its steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Bearing Fag 6205 Single Row Ball Bearing

Bearing Fag 6205 Single Row Ball Bearing

Bearing, Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6205

Materi/Bahan: steel

Berat Barang: 0.453592 kilograms

Fitur Produk:

  • Single Row Ball Bearing

Deskripsi:

New in Factory box – 6205 FAG New Single Row Ball Bearing

Bearing FAG 6332M-C3 Radial Bearing, Single Row, ABEC 1 Precision, Open, Brass Cage, C3 Clearance, Metric, 160mm ID, 340mm OD, 68mm Width, 4300rpm Maximum Rotational Speed, 72000lbf Static Load Capacity, 67000lbf Dynamic Load Capacity

Bearing FAG 6332M-C3 Radial Bearing, Single Row, ABEC 1 Precision, Open, Brass Cage, C3 Clearance, Metric, 160mm ID, 340mm OD, 68mm Width, 4300rpm Maximum Rotational Speed, 72000lbf Static Load Capacity, 67000lbf Dynamic Load Capacity

Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6332-M-C3

Materi/Bahan: steel

Diameter Lubang: 160  mm

Diameter Luar: 340  mm

Lebar Bearing: 68  mm

Kecepatan Rotasi Maksimum: 4300  RPM

Kapasitas Muatan Statis: 32658.651 kilograms

Kapasitas Muatan Dinamis: 30390.689 kilograms

Fitur Produk:

  • Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
  • Conforms to ABEC 1 precision standard for performance within a narrow range of variation
  • C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
  • Brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Deskripsi:

The FAG single-row, open radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It conforms to the precision standard Annular Bearing Engineers Committee (ABEC) 1 for performance within a narrow range of variation, and it has a C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. Its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others.

Specifications

Main bearing dimensions DIN 715
Basic dynamic load ratings DIN ISO 281
Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN
Through-hardening steel for inner and outer rings and rollers ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

 

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Bearing FAG 6228-C3 Radial Bearing, Single Row, ABEC 1 Precision, Open, Steel Cage, C3 Clearance, Metric, 140mm ID, 250mm OD, 42mm Width, 6000rpm Maximum Rotational Speed, 37500lbf Static Load Capacity, 40000lbf Dynamic Load Capacity

Bearing FAG 6228-C3 Radial Bearing, Single Row, ABEC 1 Precision, Open, Steel Cage, C3 Clearance, Metric, 140mm ID, 250mm OD, 42mm Width, 6000rpm Maximum Rotational Speed, 37500lbf Static Load Capacity, 40000lbf Dynamic Load Capacity

Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 6228-C3

Materi/Bahan: steel

Diameter Lubang: 140  mm

Diameter Luar: 250  mm

Lebar Bearing: 42  mm

Kecepatan Rotasi Maksimum: 6000  RPM

Kapasitas Muatan Statis: 17009.714 kilograms

Kapasitas Muatan Dinamis: 18143.695 kilograms

Fitur Produk:

  • Single-row bearing for supporting radial loads
  • C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
  • Conforms to ABEC 1 precision standard for performance within a narrow range of variation
  • Steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Deskripsi:

The FAG radial bearing is an open single-row bearing with metric dimensions for supporting radial loads. This single-row bearing conforms to the Annular Bearing Engineers Committee (ABEC) 1 precision standard for performance within a narrow range of variation and has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. The steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. The bearing has an open configuration for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants. This FAG radial ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Bearing FAG 1213K Self Aligning Ball Bearing

Bearing FAG 1213K Self Aligning Ball Bearing

Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 1213K

Materi/Bahan: steel

Berat Barang: 1.36078 kilograms

Fitur Produk:

  • Self Aligning Ball Bearing

Deskripsi:

New in Factory box – 1213K FAG New Self Aligning Ball Bearing

Bearing FAG 1211K-TV-C3 Self-Aligning Bearing, Double Row, Tapered Bore, Open, Polyamide/Nylon Cage, C3 Clearance, Metric, 55mm ID, 100mm OD, 21mm Width, 7500rpm Maximum Rotaional Speed, 2240lbf Static Load Capacity, 6000lbf Dynamic Load Capacity

Bearing FAG 1211K-TV-C3 Self-Aligning Bearing, Double Row, Tapered Bore, Open, Polyamide/Nylon Cage, C3 Clearance, Metric, 55mm ID, 100mm OD, 21mm Width, 7500rpm Maximum Rotaional Speed, 2240lbf Static Load Capacity, 6000lbf Dynamic Load Capacity

Bearing FAG·

Merk: Bearing FAG

Nomor/Jenis Sparepart: 1211-K-TVH-C3

Materi/Bahan: steel

Diameter Lubang: 55  mm

Diameter Luar: 100  mm

Lebar Bearing: 21  mm

Kecepatan Rotasi Maksimum: 7500  RPM

Kapasitas Muatan Statis: 1016.047 kilograms

Kapasitas Muatan Dinamis: 2721.554 kilograms

Fitur Produk:

  • Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft
  • Open configuration for lubrication applied in place
  • Glass fiber reinforced polyamide 66 plastic cage evenly spaces balls for reduced friction, vibration, and noise
  • C3 radial internal clearance is larger than normal allowing for thermal expansion

Deskripsi:

This FAG double-row self-aligning ball bearing is an open bearing, and has a tapered bore, polyamide/nylon cage, and C3 clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a tapered bore with a standard 1:12 taper to compensate for shaft deflection or to mount on a tapered shaft using an interference fit. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has an injection-molded snap-type cage made of glass fiber reinforced polyamide 66 to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This cage type can be used at operating temperatures up to 120 degrees C (250 degrees F). The bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. Additionally, this bearing is produced to PN (normal) tolerances in accordance with Deutsches Institut für Normung (DIN) 620-2 standards for quality assurance. This self-aligning ball bearing is for use in commercial and industrial applications including film processing equipment, office automation, vertical spinning equipment, and industrial countershafts, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.